Shared Aperture Reflectarray with High-Ratio Dual S/X-Band for LEO Satellite Communication Systems

The rapid expansion of Low Earth Orbit (LEO) satellite constellations necessitates the development of multi-band antennas that are not only high-performing but also low-cost, lightweight, and highly reliable for mass production. This paper addresses this need by proposing a novel shared-aperture reflectarray antenna for simultaneous S-band and X-band operation. The design is based on a single-layer architecture that co-integrates two electromagnetically distinct resonant elements—a cross-dipole for the S-band and a diamond-ring slotted patch for the X-band—onto a single 1.52 mm thick Rogers RO3003 substrate. This approach achieves a high frequency ratio of 4:1 while ensuring independent phase control and high isolation for each band through an optimized geometry, circumventing the complexity and reliability issues of conventional multilayer systems. A prototype with dimensions of 260 × 364 mm2 was fabricated and experimentally validated in an anechoic chamber. It achieved a measured peak gain of 7.99 dBi at 1.996 GHz for the S-band and 17.99 dBi at 7.94 GHz for the X-band, respectively. The results confirm the viability of the proposed design, demonstrating a structurally simple, easily manufacturable, and cost-effective alternative to complex multilayer systems, making it a promising candidate for next-generation LEO satellite communication platforms.