Effect of Nanosilica Fillers on Photopolymerisation Behaviour and Mechanical Performance of Dental Resin Composites

The performance of dental composites is strongly dependent on the type and content of ceramic fillers incorporated into the resin matrix. In this study, the effect of nanosilica (NS) fillers on the curing kinetics, physicochemical, thermal, and mechanical properties of Bis-GMA/TEGDMA-based dental composites was systematically investigated. A series of nanocomposites containing various weight fractions of NS was prepared and evaluated. The photocuring behaviour was analysed using differential scanning calorimetry (DSC), enabling the determination of polymerisation rate coefficients (propagation kp and bimolecular termination ktb) and double bond conversion. The presence of nanosilica was found to influence chain mobility, as evidenced by changes in glass transition temperature (Tg). Rheological measurements provided insight into viscosity changes induced by NS incorporation, while mechanical tests confirmed reinforcement effects. A moderate but statistically significant correlation was observed between the NS content and mechanical performance. The results obtained correlate the rheological, kinetic, thermal, and mechanical properties of multiple types of silica in a single resin system using a consistent methodology. In addition, the results highlight the role of nanosilica in the regulation of the curing dynamics and the increase in the mechanical integrity of methacrylate-based dental composites, representing a promising strategy for the development of next-generation restorative materials.