Study on the Inhibition and Activation of Pyrite Under Low Alkalinity Conditions Created by Hydrogen Peroxide and Lime

High alkalinity facilitates copper–sulfur flotation separation but also leads to issues such as high reagent consumption, pipeline scaling, and gold loss in tailings. The ore from a copper mine in Serbia contains 2.86% copper, 1.64 g/t gold, and 20.39% sulfur, with copper occurring mainly in covellite and enargite. To achieve efficient separation and recovery of copper–sulfur, a systematic study was conducted using micro-flotation, Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and contact angle analysis to investigate the inhibition and activation patterns of pyrite under low and high alkalinity conditions. The results indicate that the combined use of hydrogen peroxide and lime as inhibitor enables efficient separation of pyrite and covellite under low-alkalinity conditions. This effect is attributed to its ability to enhance oxidation of the pyrite surface, which generates more hydrophilic substances. Under low-alkalinity conditions (slurry pH = 10) regulated with hydrogen peroxide and lime in a covellite flotation cycle, and under acidic conditions (slurry pH = 6) in the pyrite flotation cycle, satisfactory results are obtained in both flotation cycles in comparison with industrial data. The copper flotation index was similar, but pyrite and gold recovery increased by 2.3% and ~4%, respectively, over those using lime alone. This process reduced the activator dosage required for pyrite activation substantially, while improving gold recovery. Results demonstrate an efficient method for copper–sulfur separation and recovery, providing theoretical guidance or industrial production processes.