Hydraulic Capacity of the Segura River Channel (SE Spain) in Urban Areas: 2D Hydraulic Modeling in HEC-RAS and Comparison of Results with the September 2019 Flood Event in the Lower Segura Basin

This article proposes a novel methodology based on the 2D hydraulic model of the HEC-RAS software, with a stepped ascending hydrograph that allows determining the maximum capacities of the channel (value at which overflow occurs), identifying potential breaking and overflow points, and the affected areas. This methodology also allows for determining whether the theoretical hydraulic capacities indicated by official agencies correspond to the current capacity of the channel. The areas analyzed correspond to the urban channel sections of the Segura River as it passes through Murcia, Orihuela, Almoradí, and Rojales. The results show that the capacity is much lower than the estimated flows, which explains the overflows of the Segura River in some sections. These results have been compared with the events of the September 2019 flood. The discussion addresses some potential problems identified during the modeling process and how they were resolved. The importance of understanding these capacities for better flood management is also highlighted. It is concluded that the Segura River channel capacity is lower, that it is a method that can be extrapolated to other rivers, and that it allows for more effective management of river floods, reducing the impacts on the population.