Thermal Performance Assessment of Heat Storage Unit by Investigating Different Fins Configurations

Energy shortage is a significant global concern due to the heavy reliance of industrial and residential sectors on energy. As fossil fuels diminish, there is a pressing shift towards alternative energy sources such as solar and wind. However, the intermittent nature of these renewable resources, such as the absence of solar energy at night, necessitates robust energy storage solutions. This study focuses on enhancing the performance of a thermal storage unit by employing multiple fin configuration with solar salt (NaNO3-KNO3) as a phase change material (PCM) and Duratherm 630 as a heat transfer fluid (HTF). Notably, W-shaped and trapezoidal fins achieved reductions in melting time from 162 min to 84 min and 97 min, respectively, while rectangular fins were the least effective, albeit still reducing melting time to 143 min. Reduction in thermal gradients due to well-developed thermal mixing significantly reduced phase transition duration. Impact of fins geometries on localized vortexes generation within the unit was identified. W-shaped and trapezoidal fins were notably efficacious because of greater heat transfer area and better heat distribution through conduction and convection.