Flexural and structural behavior of additively manufactured zirconia: Influence of firing process and build orientation
At 0-degree orientation, the tested 3Y-TZP slurry demonstrated load-bearing capacity comparable with that of subtractively manufactured 3Y-TZP and 4Y-TZP, regardless of the firing process. However, SEM analysis of AM specimens revealed residual pores, and SM specimens showed a higher concentration of monoclinic-phase crystals.
Authors
- Ahmet Burçin BATIBAY (ORCID: https://orcid.org/0000-0002-2606-5115)
- Gabriela Panca Sabatini (ORCID: https://orcid.org/0000-0003-3221-2422)
- Pedro Molinero‐Mourelle (ORCID: https://orcid.org/0000-0001-5493-0295)
- Mehmet Esad Güven (ORCID: https://orcid.org/0000-0001-9075-9931)
- Mustafa Borga Dönmez (ORCID: https://orcid.org/0000-0002-3094-7487)
- Burak Yılmaz (ORCID: https://orcid.org/0000-0002-7101-363X)
- Gülce Çakmak (ORCID: https://orcid.org/0000-0003-1751-9207)
- Newton Sesma (ORCID: https://orcid.org/0000-0001-5044-1742)
Institutions
- University of Bern (CH)
- Universidade de São Paulo (BR)
- Instituto Cajal (ES)
- Humboldt-Universität zu Berlin (DE)
- Biruni University (TR)
- Necmettin Erbakan University (TR)
- General Directorate of Forestry (TR)
Publication Details
- Journal
- Journal of Prosthetic Dentistry
- Published
- 2025-11-10
- DOI
- https://doi.org/10.1016/j.prosdent.2025.10.043
- Primary Topic
- Advanced ceramic materials synthesis
- Type
- article
- Field-Weighted Citation Impact
- 0.00