Development Characteristics of Mining-Induced Fractures in Weakly Cemented Overburden During the First Layer Mining of Ultra-Thick Coal Seam: Similar Simulation and Field Measurement

Focusing on the mining-induced fracture development characteristics of Weakly Cemented Overburden (WCO) in Ultra-Thick Coal Seam (UTCS) extraction, this study, based on the 1101 first mining face in Xinjiang’s Zhundong Coalfield, systematically investigates the dynamic evolution law of the water-conducting fracture zone (WCFZ) in WCO by employing similarity simulation, quantitative characterization using Fractal Dimension (D), and surface borehole exploration and borehole imaging technology. The results show that existing prediction equations for the WCFZ have poor applicability in the study area, with significant fluctuations in prediction outcomes. Similarity simulation reveals that Thick Soft Rock Layers (TS) guide and control fracture development, with the D exhibiting a “step-like” evolution. After the first rupture of TS1, the peak D reaches 1.49, stabilizing between 1.36 and 1.37 after full extraction. The height of the WCFZ increases non-linearly with the advance of the working face, reaching a maximum of 189 m, with a fracture-to-mining ratio of 10.5. Based on D fluctuations and extension patterns, the fracture development is divided into three stages, initial development, vertical propagation, and stabilization, clarifying its spatial evolution. Field measurements indicate a WCFZ height ranging from 161 to 178 m, with a fracture-to-mining ratio of 9.73–12.18, showing only a 6.2% error compared to the simulation results, which verifies the reliability of the experiment. This study reveals the evolution mechanism of the WCFZ during mining in UTCS and WCO in the Zhundong area, providing a theoretical basis and practical guidance for mine disaster prevention and control, as well as safe and efficient mining.