Experimental Study on the Characteristics of Dual Synthetic Jets Modulated by Driving Signals

Piezoelectric synthetic jet actuators typically struggle to generate high-speed jets at low driving frequencies due to the coupling effect between jet frequency and jet intensity. This limitation to some extent restricts their application in flow control within low-speed flow fields. To address this issue, this study presents two methods of signal modulation. The effects of driving signal modulation on dual synthetic jet actuator (DSJA) characteristics were experimentally investigated. A laser displacement meter was used to measure the central point amplitude of the piezoelectric diaphragm, while the velocity at the exit of the DSJAs was measured using a hot-wire anemometer. The effects of signal modulation on the amplitude of the piezoelectric diaphragm, the maximum jet velocity, and the frequency domain characteristics of the dual synthetic jet (DSJ) were thoroughly analyzed. Experimental results demonstrate that driving signal modulation can enhance jet velocity at relatively low driving frequencies. The modulated DSJ exhibits low-frequency characteristics, rendering it suitable for flow control applications that require low-frequency jets. Furthermore, the coupling effect between jet frequency and jet intensity in the piezoelectric DSJA is significantly alleviated. Starting from the vibration displacement of the piezoelectric transducer (PZT), this paper systematically elaborates on the corresponding relationship between PZT displacement and the peak velocity at the jet outlet, and the “low-frequency and high-momentum jet generation method based on signal modulation” proposed herein is expected to break through the momentum–frequency coupling limitation of traditional piezoelectric dual-stenosis jet actuators (DSJAs) and enhance their application potential in low-speed flow control.