Claus waste-derived TiO2 coupled with UiO-66 for an S-scheme heterojunction with enhanced photocatalytic activity
This research investigates the decoration of UiO-66 with TiO<sub>2</sub> derived from recycling units of the gas refinery Claus process, using a solvothermal technique. Comprehensive materials characterization by XRD, FT-IR, TGA, FE-SEM, and BET confirmed the successful formation of a well-defined UiO-66/TiO<sub>2</sub> heterojunction, with TiO<sub>2</sub> nanoparticles uniformly distributed on the UiO-66 surface. The nanocomposite exhibited a reduced optical bandgap (2.92 eV) compared to pristine UiO-66 (3.97 eV) and TiO<sub>2</sub> (3.20 eV), as well as enhanced surface. The constructed UiO-66/CWT S-scheme heterojunction facilitates efficient charge separation via interfacial recombination of UiO-66 photogenerated electrons and CWT photogenerated holes, thereby improving photocatalytic efficiency. The resulting UiO-66/TiO<sub>2</sub> nanocomposite exhibited enhanced photocatalytic performance under visible light compared to pristine UiO-66 and TiO<sub>2</sub> particles. The optimal conditions for Rhodamine B (RhB) mineralization with the highest photocatalytic removal efficiency were determined by evaluating the effects of the Claus process waste (CWT) to UiO-66 weight ratio, pH, photocatalyst dose, initial dye concentration, and reaction temperature. Under optimal conditions, with a CWT to UiO-66 weight ratio of 2:1, a pH of 3, a photocatalyst dose of 500 mg/L, an initial dye concentration of 25 mg/L, and a temperature of 25 °C, the dye removal efficiency increased to 97.42%. In other words, the formation of the nanocomposite can improve charge carrier separation and enhance photocatalytic activity. Furthermore, the decolorization kinetics followed accurately the Langmuir-Hinshelwood (L-H) first-order model. In conclusion, high-purity TiO<sub>2</sub> was successfully produced using as-recycled TiO<sub>2</sub> sourced from the gas refinery Claus process, demonstrating the potential of converting low-grade TiO<sub>2</sub> from spent catalysts. The approach outlined here offers new perspectives on the value-added recycling of titanium resources in the Claus unit.
Authors
- Bita Ayati (ORCID: https://orcid.org/0000-0001-7720-9863)
- Hossein Shekari
- Habibollah Younesi (ORCID: https://orcid.org/0000-0003-3664-9525)
- Maedeh Kouhfallah
Institutions
- Tarbiat Modares University (IR)
Publication Details
- Journal
- Scientific Reports
- Published
- 2025-11-04
- DOI
- https://doi.org/10.1038/s41598-025-22451-y
- Primary Topic
- TiO2 Photocatalysis and Solar Cells
- Type
- article
- Field-Weighted Citation Impact
- 0.00