Experimental shear behaviour of self-compacting concrete dry joints in PCSBs under combined axial, bending and shear forces

The behaviour of precast concrete segmental bridges (PCSBs) fundamentally depends on the joints, which represent discontinuity zones and must be capable of transmitting combined forces (axial, bending and shear) between segments. Under service conditions, joints in PCSBs are expected to remain in full contact, although partial opening may occur under ultimate load conditions. Castellated dry joints with external prestressing are increasingly used due to their efficient construction, environmental advantages and adequate mechanical interlock. Although numerous experimental and numerical studies have investigated their shear behaviour and capacity, studies under combined forces are very limited. The test configuration developed by the authors allows the shear behaviour of the joints to be investigated independently of the global behaviour of the segmental beams. This paper presents 22 push-off tests, 17 from the present experimental programme and 5 from previous studies conducted by the authors, on specimens with three-keyed dry joints made of different concrete types and fibre contents, subjected to varying axial forces and eccentricities. The influence of these variable parameters on cracking patterns and shear capacity was studied. In addition, the results obtained under eccentric loading were compared with those from specimens subjected to uniform confining stress, which showed shear capacities up to 49% higher than those under eccentric loading. Finally, the accuracy of the AASHTO and Fouré et al. formulations for predicting shear strength under combined loading was evaluated for different concrete types, with and without steel fibres.

Authors

Institutions

Publication Details

Journal
Structures
Published
2026-11-14
DOI
https://doi.org/10.1016/j.istruc.2026.113448
Primary Topic
Structural Behavior of Reinforced Concrete
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Experimental shear behaviour of self-compacting concrete dry joints in PCSBs under combined axial, bending and shear forces

Miguel Ángel Fernández Prada, José Luis Bonet, Celia Traver-Abella
Structures
Structural Behavior of Reinforced Concrete
article

Experimental shear behaviour of self-compacting concrete dry joints in PCSBs under combined axial, bending and shear forces

Miguel Ángel Fernández Prada, José Luis Bonet, Celia Traver-Abella
article en

Abstract

The behaviour of precast concrete segmental bridges (PCSBs) fundamentally depends on the joints, which represent discontinuity zones and must be capable of transmitting combined forces (axial, bending and shear) between segments. Under service conditions, joints in PCSBs are expected to remain in full contact, although partial opening may occur under ultimate load conditions. Castellated dry joints with external prestressing are increasingly used due to their efficient construction, environmental advantages and adequate mechanical interlock. Although numerous experimental and numerical studies have investigated their shear behaviour and capacity, studies under combined forces are very limited. The test configuration developed by the authors allows the shear behaviour of the joints to be investigated independently of the global behaviour of the segmental beams. This paper presents 22 push-off tests, 17 from the present experimental programme and 5 from previous studies conducted by the authors, on specimens with three-keyed dry joints made of different concrete types and fibre contents, subjected to varying axial forces and eccentricities. The influence of these variable parameters on cracking patterns and shear capacity was studied. In addition, the results obtained under eccentric loading were compared with those from specimens subjected to uniform confining stress, which showed shear capacities up to 49% higher than those under eccentric loading. Finally, the accuracy of the AASHTO and Fouré et al. formulations for predicting shear strength under combined loading was evaluated for different concrete types, with and without steel fibres.

StructuresVol. 94
Universitat Politècnica de València (ES)
Industry, innovation and infrastructure
Structural Behavior of Reinforced Concrete
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon