Reducing Greenhouse Gas Emissions from Micro Gas Turbines Using Silicon Carbide Switches

In micro gas turbines, electrical power from the high-speed generator is delivered to the grid through a converter that influences overall efficiency and energy quality. This subsystem is often overlooked in efforts to improve turbine performance, which have traditionally focused on combustors and turbomachinery. This study investigates how replacing conventional silicon switching devices in the converter with silicon carbide technology can directly reduce greenhouse gas emissions from micro gas turbines. Although silicon carbide is widely used in electric vehicles and distributed energy systems, its emission reduction impact has not been assessed in micro gas turbines. A MATLAB-based model of a 100 kW Ansaldo Energia micro gas turbine was used to compare the performance of silicon and silicon carbide converters across the 20–100 kW operating range. Silicon carbide reduced total converter losses from 4.316 kW to 3.426 kW at full load, a decrease of 0.889 kW. This improvement lowered carbon dioxide emissions by 5.7 g/kWh and increased net electrical efficiency from 30.03% to 30.29%. Each turbine can therefore avoid about 1.53 tonnes of carbon dioxide annually, or 11.61 tonnes over a 50,000 h service life, without altering turbine design, combustor geometry, or fuel composition. This work establishes the first quantitative link between wide-bandgap semiconductor performance and direct greenhouse gas mitigation in micro gas turbines, demonstrating that upgrading converter technology from silicon to silicon carbide offers a deployable pathway to reduce emissions from micro gas turbines and, by extension, lower the carbon intensity of distributed generation systems.