Aqueous Polyhydroxyalkanoate Solution-Based Knife Coatings: An Alternative Approach to the Production of Coated Cotton Fabrics

Footwear is traditionally manufactured using non-biodegradable polymers and leather, raising well-documented environmental and health concerns related to their production and disposal. This study explores polyhydroxyalkanoates (PHAs) as sustainable alternatives for bio-based footwear components. A stable aqueous suspension of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) was successfully formulated and applied to cotton fabrics via knife-coating. Various formulations, with and without additives and employing natural or synthetic thickeners, were evaluated in terms of surface morphology, wettability, permeability, and durability. The 10% PHBHHx formulation provided the best balance between material efficiency, coating uniformity, and surface performance. Additives and thermal treatment both influenced wettability, reducing contact angles and enhancing water vapor permeability. Notably, coatings with additives and hot pressing exhibited the highest permeability (68.0 ± 3.1 L/m2/s; 651.0 ± 5.4 g/m2/24 h), while additive-free, non-pressed coatings showed significantly lower values (19.5 ± 4.4 L/m2/s; 245.6 ± 66.2 g/m2/24 h), likely due to excessive compaction. Abrasion resistance remained excellent across all samples, especially with thermal treatment, withstanding 51,200 cycles. Washing resistance results revealed a synergistic effect between additives and heat, promoting long-term hydrophobicity and coating adhesion. Overall, PHBHHx coatings demonstrated potential to enhance water resistance while maintaining breathability, representing a sustainable and effective solution for functional and technical footwear applications.