Experiment and analysis of the seed suction model for rice pneumatic seed metering device using DEM-CFD approach

The model describing the forces acting on rice seeds within seed metering systems significantly impacts the design and structural parameters of rice pneumatic seed metering mechanisms. To formulate a mathematical representation of the device during seed suction, a DEM-CFD bidirectional coupling approach was utilized to simulate and model the seed-suction process. The dynamic behavior of rice seeds under the airflow at the suction port was examined, and force models for various seed-suction positions were developed. Simulation analyses were conducted under varying conditions, including different rotation speeds of the seed-suction plate and different levels of negative suction pressure. The effects of these variables on seed suction were investigated, leading to the development of a drag force model. Optimal seeding parameters and precision were determined from the simulation results. Verification and analysis were conducted through empirical experiments, and the optimal seeding performance was attained at a negative suction pressure of 1.6 kPa and a plate rotation speed of 30 r/min. The results indicated a seeding qualification rate of 95.7%, a reattachment rate of 2.4%, and a leakage suction rate of 1.9%. The simulation findings were consistent with experimental data, demonstrating that the seed-metering device satisfies the requirements for field seeding. Keywords: rice seeding, seed metering device, seed suction model, agricultural machinery, DEM-CFD DOI: 10.25165/j.ijabe.20251805.9422 Citation: Xing H, Wang Y W, Chen Y B, Yang R, Bo X Z, Zang Y. Experiment and analysis of seed suction model for rice pneumatic seed metering device using DEM-CFD approach. Int J Agric & Biol Eng, 2025; 18(5): 191–197.