Separation of Silver and Cellulosic Fibers for Recycling and Reuse of Printed Electronic Devices Components

The printed electronics sector is experiencing significant growth driven by societal expectations. The use of cellulosic substrates is an excellent strategy that offers interesting research prospects, but also sets challenges in terms of management and recycling of these new wastes to avoid their accumulation. This work investigates the recycling ability of paper-based printed electronics (a simple RFID antenna printed on paper), containing silver particles in the functional ink, using processes already applied in conventional paper and board recycling lines. These operations, commonly used in the papermaking industry, are pulping, screening, centrifugal cleaning, and flotation. The efficiency of each unit operation was evaluated. Mass balances between the inlet and the outlet of each studied operation have been established in order to evaluate the separation efficiency of Ag and cellulosic fibers, the objective being to reuse the fibers to manufacture a recycled paper, and to recover Ag in another fraction for further valorization. The results are encouraging, with more than 70% of silver and over 80% of cellulose fibers recovered, demonstrating a higher recovery efficiency compared to typical recycling methods reported in the literature. Thus, it has been shown that existing processes used in conventional recycling lines can be adapted to efficiently separate functional materials from cellulosic fibers, offering an improvement in both metal and fibers’ recovery.