Optimizing divalent metal composition in layered double hydroxides for sustainable NO photocatalytic removal

The presence of nitrogen oxides (NO x ) in urban areas has adverse effects on both human health and the environment, but efficient and affordable photocatalytic elimination of NO x represents a challenge. In this study, we investigated a series of Aqueous Miscible Organic Solvent Treatment Layered Double Hydroxides (AMO-LDHs), Zn x (Mg 3 − x )Al-CO 3 AMO-LDHs (0 ≤ x ≤ 3), for the photocatalytic removal of gaseous NO x from air (DeNO x process). Considering that zinc is an “endangered element” where projected demand is far greater than known reserves, the aim was to identify a sustainable, low-cost material with promising photocatalytic properties by modifying the Mg/Zn ratio. The LDHs were prepared using a simple co-precipitation method followed by Aqueous Miscible Organic Solvent Treatment (AMOST). All the samples exhibited uniform metal distribution without impurities. Incorporation of Zn into the AMO-LDH structure increased the nanosheet thickness and reduced their aggregation, resulting in slight morphological changes. It also influenced the positions of the valence and conduction bands, thereby affecting the photochemical mechanism. Among the studied compositions, Zn 0.5 Mg 2.5 Al AMO-LDH showed the most promising performance for NO x removal, offering NO x removal efficiencies of 51 %, low NO₂ formation with outstanding selectivity (up to 93 %) and significantly enhanced efficiency compared to Mg 3 Al AMO-LDH or commercial ZnO. Furthermore, this sample exhibited exceptional stability and reusability, maintaining its photocatalytic efficiency throughout the repeated cycles, highlighting its potential for practical DeNO x application. • First report on Zn x (Mg 3–x )Al LDHs as DeNO x photocatalysts • Optimal Zn 0.5 Mg 2.5 Al achieves 51 % NO x removal. • Zn 0.5 Mg 2.5 Al shows excellent selectivity (91 %) and stable cyclability. • Zn 0.5 Mg 2.5 Al outperformed commercial ZnO even under long irradiation tests (24 h). • ·OH radicals are responsible for the observed photocatalytic results.

Authors

Institutions

Publication Details

Journal
Chemical Engineering Journal
Published
2025-10-28
DOI
https://doi.org/10.1016/j.cej.2025.170257
Citations
4
Primary Topic
Layered Double Hydroxides Synthesis and Applications
Type
article
Field-Weighted Citation Impact
2.07
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Optimizing divalent metal composition in layered double hydroxides for sustainable NO photocatalytic removal

Luis Sánchez, Philip Kenyon, Dermot O’Hare, Ivana Pavlović et al.
4 citations
Chemical Engineering Journal
Layered Double Hydroxides Synthesis and Applications
2.07
article

Optimizing divalent metal composition in layered double hydroxides for sustainable NO photocatalytic removal

Luis Sánchez, Philip Kenyon, Dermot O’Hare, Ivana Pavlović, Adrián Pastor, Laura Marín, F. Martı́n
article en
4 citations

Abstract

The presence of nitrogen oxides (NO x ) in urban areas has adverse effects on both human health and the environment, but efficient and affordable photocatalytic elimination of NO x represents a challenge. In this study, we investigated a series of Aqueous Miscible Organic Solvent Treatment Layered Double Hydroxides (AMO-LDHs), Zn x (Mg 3 − x )Al-CO 3 AMO-LDHs (0 ≤ x ≤ 3), for the photocatalytic removal of gaseous NO x from air (DeNO x process). Considering that zinc is an “endangered element” where projected demand is far greater than known reserves, the aim was to identify a sustainable, low-cost material with promising photocatalytic properties by modifying the Mg/Zn ratio. The LDHs were prepared using a simple co-precipitation method followed by Aqueous Miscible Organic Solvent Treatment (AMOST). All the samples exhibited uniform metal distribution without impurities. Incorporation of Zn into the AMO-LDH structure increased the nanosheet thickness and reduced their aggregation, resulting in slight morphological changes. It also influenced the positions of the valence and conduction bands, thereby affecting the photochemical mechanism. Among the studied compositions, Zn 0.5 Mg 2.5 Al AMO-LDH showed the most promising performance for NO x removal, offering NO x removal efficiencies of 51 %, low NO₂ formation with outstanding selectivity (up to 93 %) and significantly enhanced efficiency compared to Mg 3 Al AMO-LDH or commercial ZnO. Furthermore, this sample exhibited exceptional stability and reusability, maintaining its photocatalytic efficiency throughout the repeated cycles, highlighting its potential for practical DeNO x application. • First report on Zn x (Mg 3–x )Al LDHs as DeNO x photocatalysts • Optimal Zn 0.5 Mg 2.5 Al achieves 51 % NO x removal. • Zn 0.5 Mg 2.5 Al shows excellent selectivity (91 %) and stable cyclability. • Zn 0.5 Mg 2.5 Al outperformed commercial ZnO even under long irradiation tests (24 h). • ·OH radicals are responsible for the observed photocatalytic results.

Chemical Engineering JournalVol. 525
University of Lisbon (PT), Durham University (GB), University of Oxford (GB), University of Córdoba (ES), Universidad de Málaga (ES)
Openalex Percentile: Top 12%
Layered Double Hydroxides Synthesis and Applications
2.07
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.