Role of Internal Cyclic Heat Treatment on Regulating Microstructure and Mechanical Properties of Laser Melting-Deposited Ti2AlNb Alloy

Laser melting deposition (LMD), one of the novel powder-to-powder welding technologies, has emerged as an ideal method for fabricating lightweight high-temperature Ti2AlNb alloy. However, the high thermal gradients and heat accumulation during the LMD process typically promote grain growth along the deposition direction, resulting in coarse columnar grains and high internal residual stress. This study investigates the influence of prolonged aging treatment and internal cyclic heat on the microstructure and mechanical properties of Ti2AlNb alloys. Both long-term aging and internal cyclic heat induce the columnar-to-equiaxed grain morphology transition. A 48 h aging heat treatment at 750 °C facilitates the formation of a B2 + O dual-phase lamellar structure, leading to a significant improvement in room-temperature strength. Internal cyclic heat effectively reduces the cooling rate, eliminates internal stress, and suppresses the precipitation of the brittle and detrimental α2 phase. This results in a more homogeneous distribution of O-phase laths, raising the room-temperature tensile strength from 938 MPa to 1215 MPa and achieving a high-temperature strength of 1116 MPa at 650 °C. These improvements demonstrate a synergistic enhancement in both room- and high-temperature strength and ductility, which provides an efficient strategy for in situ regulation of the microstructure and mechanical properties of laser-deposited Ti2AlNb alloys.