Rheological Study and FTIR Analysis of Thermally Degraded Mineral and Biodegradable Hydraulic Fluids

In this work, three hydraulic fluids—a paraffinic mineral hydraulic oil (H46) and two biodegradable oils (HETG46—hydraulic oil based on natural esters and HF-E46—hydraulic oil based on synthetic esters derived from fatty acids extracted from vegetable oils)—were studied in both fresh and thermally degraded states. The study of these oils was performed both from a rheological and spectroscopic point of view using Fourier transform infrared spectroscopy (FTIR). The thermal degradation process consisted of repeated heating and cooling cycles at four different temperatures for 15 min performed eight times. The rheological characterization was initially performed for the fresh oils, and the results obtained were compared with those of the thermally degraded samples. For the rheological characterization, two rheological models (the Newtonian model and the power law model) were used, following which the rheological parameters were determined. At the same time, this work highlights how thermal degradation influences the rheological behavior and chemical structure of hydraulic fluids. The results obtained showed that the Newtonian model best describes the rheological behavior of the analyzed fluids. From a chemical point of view, FTIR analysis did not reveal significant changes between fresh fluids and those subjected to thermal degradation.