Developing Calibration Reference Materials and Standardized Protocols for Reliable <scp>DSC</scp> of Polyolefins

ABSTRACT Differential scanning calorimetry (DSC) serves as a critical analytical tool in the polyolefin industry for quality control and product differentiation. Between 2000 and 2025, 7574 global patent applications referenced DSC data, highlighting its ubiquitous role in the industry. While DSC demonstrates exceptional precision in standardized measurements (e.g., indium melting onset temperature standard deviation σ = 0.03°C), the precision in polyolefin characterization remains less defined. This study thus seeks to answer the key question: what level of precision could DSC achieve for polyolefin analysis? Using medical‐grade homopolymer polyethylene (DMDA 8007) as a reference material, the T m σ was measured as 0.48°C under ASTM E967/E968 protocols, a 16‐fold precision degradation compared to that of the indium calibration. To investigate this discrepancy, the impact of DSC testing parameters, sample preparation methods, and sample weight control on measurement precision was systematically analyzed. Through optimizing experimental design, an improved testing protocol (including optimized sample preparation procedures) was developed, reducing the T m σ of DMDA 87000 from 0.48°C (ASTM baseline) to 0.11°C. This new protocol not only enhances DSC testing precision for polyolefins but also enables robust correlations between the DSC results and material properties, such as polymer density in LLDPE and comonomer content in EVA.