Preparation of Poly(vinylidene fluoride-co-hexafluoropropylene) Doped Cellulose Acetate Films for the Treatment of Calcium-Based Hardness from Aqueous Solution

Calcium (Ca2+ ions) is one of the dominant elements that contribute to water hardness, scaling in pipes, bathroom faucets, and kitchen utensils. Herein, we report on the development of poly(vinylidene fluoride-co-hexafluoropropylene) cellulose acetate (PVDF-HFP/CA) films for the treatment of Ca2+ ions as one of the constituents that causes water hardness. CA and PVDF-HFP polymers, and their blend consisting of 3 wt.% PVDF-HFP/CA, were effectively synthesised through the phase inversion technique. Analysis using thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) confirmed the effective incorporation of 3 wt.% PVDF-HFP into the cellulose acetate film. Parameters such as temperature, initial concentration, pH, adsorbent dosage and contact time were investigated in batch studies during the removal of Ca2+ ions in synthetic water samples. Under optimal conditions (pH 7, adsorbent dosage of 0.5 mg/L, and concentration of 120 mg/L), the 3 wt.% PVDF-HFP/CA film achieved a 99% adsorption efficiency for Ca2+ ions in 90 min. The adsorption process adhered to pseudo-second-order and Freundlich isotherm models, which suggest that the adsorption of Ca2+ ions is heterogeneous. The maximum adsorption efficiency achieved was 56 mg/g, indicating an endothermic physisorption process. The 3 wt.% PVDF-HFP/CA film maintained higher adsorption in the presence of counter ions and in a binary system, and it could be recycled at least three times. Thus, the findings demonstrated that the 3 wt.% PVDF-HFP/CA film could be a valuable material for Ca2+ ions removal to acceptable drinking water levels.