Influence of nitrogen, sulphur, and selenium foliar application on yield and accumulation of selenium in spring wheat grains (Triticum aestivum L.)

The study is focused on the evaluation of selenium, nitrogen and sulphur effects on yield, macro- and micronutrient content (N, P, K, Ca, Mg, S, Zn, Fe, Mn, Cu) and quality (Se content, starch, fibre, ash and fat) in wheat grain. Small-plot field experiments (10 m<sup>2</sup> each plot) were established on loam to clay loam mollic soil with total Se content 0.21–0.22 mg/kg in eliezovce on the land of the Central Control and Testing Institute in Agriculture of the Slovak Republic. The effect of growing season on two sources of selenium, in the form of sodium selenite (Na<sub>2</sub>SeO<sub>3</sub> · 5 H<sub>2</sub>O) and sodium selenate (Na<sub>2</sub>SeO<sub>4</sub>), was monitored during the growth phase BBCH 29 (the end of the tillering phase) in a two-year experiment. The experiment included six foliar treatments in four repetitions, which were differentiated as follows: T1 – 30 kg N/ha; T1 Se0<sub>3</sub><sup>2–</sup> – 30 kg N/ha and 20 g Se/ha; T1 Se0<sub>4</sub><sup>2–</sup> – 30 kg N/ha and 20 g Se/ha; T2 – 30 kg N/haand 10 kg S/ha; T2 Se0<sub>3</sub><sup>2–</sup> – 30 kg N/ha, 10 kg S/ha and 20 g Se/ha; T2 Se0<sub>4</sub><sup>2–</sup> – 30 kg N/ha, 10 kg S/ha and 20 g Se/ha.A statistically significant difference in yield was found between the growing seasons. Statistically non-significant impact of treatments on achieved yields was found. The highest average Se content in grain, 0.90 ± 0.28 mg/kg, was achieved on treatment T2 Se0<sub>4</sub><sup>2–</sup>. The application of sodium selenite appeared to be less effective than selenate form in the evaluation of average Se content in grain, where statistically significantly higher Se contents (T1 Se0<sub>4</sub><sup>2–</sup> 0.78 ± 0.22 mg/kg; T2 Se0<sub>4</sub><sup>2–</sup> 0.90 ± 0.28 mg/kg) were found after selenate application. The application of two types of fertilisers and two forms of selenium did not significantly increase the content of N, P, Mg, and S in grain. The Fe content in the grain was increased by treatment T2 Se0<sub>3</sub><sup>2–</sup>. The application of sodium selenate compared to sodium selenite significantly increased the starch content (T1 Se0<sub>4</sub><sup>2–</sup> 56.39 ± 4.44%; T2 Se0<sub>4</sub><sup>2–</sup> 55.87 ± 4.05) in the grain of spring wheat.

Authors

Publication Details

Journal
Plant Soil and Environment
Published
2025-10-17
DOI
https://doi.org/10.17221/67/2025-pse
Primary Topic
Selenium in Biological Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Influence of nitrogen, sulphur, and selenium foliar application on yield and accumulation of selenium in spring wheat grains (Triticum aestivum L.)

Peter Hozlár, Marek Slepčan, Jakub Sitkey, Marek Rašovský et al.
Plant Soil and Environment
Selenium in Biological Systems
article

Influence of nitrogen, sulphur, and selenium foliar application on yield and accumulation of selenium in spring wheat grains (Triticum aestivum L.)

Peter Hozlár, Marek Slepčan, Jakub Sitkey, Marek Rašovský, Vladimír Pačuta, Ladislav Varga, Dávid Ernst, Mária Vicianová, Ladislav Ducsay, Alexandra Zapletalová, Daša Kubatková
article en

Abstract

The study is focused on the evaluation of selenium, nitrogen and sulphur effects on yield, macro- and micronutrient content (N, P, K, Ca, Mg, S, Zn, Fe, Mn, Cu) and quality (Se content, starch, fibre, ash and fat) in wheat grain. Small-plot field experiments (10 m<sup>2</sup> each plot) were established on loam to clay loam mollic soil with total Se content 0.21–0.22 mg/kg in eliezovce on the land of the Central Control and Testing Institute in Agriculture of the Slovak Republic. The effect of growing season on two sources of selenium, in the form of sodium selenite (Na<sub>2</sub>SeO<sub>3</sub> · 5 H<sub>2</sub>O) and sodium selenate (Na<sub>2</sub>SeO<sub>4</sub>), was monitored during the growth phase BBCH 29 (the end of the tillering phase) in a two-year experiment. The experiment included six foliar treatments in four repetitions, which were differentiated as follows: T1 – 30 kg N/ha; T1 Se0<sub>3</sub><sup>2–</sup> – 30 kg N/ha and 20 g Se/ha; T1 Se0<sub>4</sub><sup>2–</sup> – 30 kg N/ha and 20 g Se/ha; T2 – 30 kg N/haand 10 kg S/ha; T2 Se0<sub>3</sub><sup>2–</sup> – 30 kg N/ha, 10 kg S/ha and 20 g Se/ha; T2 Se0<sub>4</sub><sup>2–</sup> – 30 kg N/ha, 10 kg S/ha and 20 g Se/ha.A statistically significant difference in yield was found between the growing seasons. Statistically non-significant impact of treatments on achieved yields was found. The highest average Se content in grain, 0.90 ± 0.28 mg/kg, was achieved on treatment T2 Se0<sub>4</sub><sup>2–</sup>. The application of sodium selenite appeared to be less effective than selenate form in the evaluation of average Se content in grain, where statistically significantly higher Se contents (T1 Se0<sub>4</sub><sup>2–</sup> 0.78 ± 0.22 mg/kg; T2 Se0<sub>4</sub><sup>2–</sup> 0.90 ± 0.28 mg/kg) were found after selenate application. The application of two types of fertilisers and two forms of selenium did not significantly increase the content of N, P, Mg, and S in grain. The Fe content in the grain was increased by treatment T2 Se0<sub>3</sub><sup>2–</sup>. The application of sodium selenate compared to sodium selenite significantly increased the starch content (T1 Se0<sub>4</sub><sup>2–</sup> 56.39 ± 4.44%; T2 Se0<sub>4</sub><sup>2–</sup> 55.87 ± 4.05) in the grain of spring wheat.

Plant Soil and EnvironmentVol. 71(10)
Openalex Percentile: Top 64%
Selenium in Biological Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.