Toward Sustainability: Electrochemical and Spectroscopic Analysis of Microbial Fuel Cells Using Carrot Pulp

Limited access to electricity and high levels of CO2 emissions—over 35 billion metric tons in recent years—highlight the urgent need for sustainable energy solutions, particularly in rural areas dependent on polluting fuels. To address this challenge, three single-chamber microbial fuel cells (MFCs) with carbon anodes and zinc cathodes were designed and operated for 35 days in a closed circuit. Voltage, current, pH, conductivity, ORP, and COD were monitored. FTIR-ATR spectroscopy (range 4000–400 cm−1) was applied to identify structural changes, and polarization curves were constructed to estimate internal resistance. The main FTIR peaks were observed at 1027, 1636, 3237, and 3374 cm−1, indicating the degradation of polysaccharides and hydroxyl groups. The maximum voltage reached was 0.961 ± 0.025 V, and the peak current was 3.052 ± 0.084 mA on day 16, coinciding with an optimal pH of 4.977 ± 0.058, a conductivity of 194.851 ± 2.847 mS/cm, and an ORP of 126.707 ± 6.958 mV. Connecting the three MFCs in series yielded a total voltage of 2.34 V. Taxonomic analysis of the anodic biofilm revealed a community dominated by Firmicutes (genus Lactobacillus: L. acidophilus, L. brevis, L. casei, L. delbrueckii, L. fermentum, L. helveticus, and L. plantarum), along with Bacteroidota and Proteobacteria (electrogenic bacteria). This microbial synergy enhances electron transfer and validates the use of carrot waste as a renewable source of bioelectricity for low-power applications.