Design of an Imaging Air Cherenkov Telescope array layout with differential programming

Current optimization of ground-based Cherenkov telescopes arrays, also called Imaging Air Cherenkov Telescope (IACT) arrays, relies on brute-force human-driven approaches based on large simulations requiring both high amount of storage and long computation time. To explore the full phase space of telescope positioning of a given array even more simulations would be required. To optimize any array layout, we explore the possibility of developing a differential program with surrogate models of IACT arrays based on high-level instrument response functions (IRFs). The simulation time of a single telescope to a cosmic-ray event can be significantly reduced with its instrument response function or with generative models. However, it is not straight forward to model the array of telescopes from a set of single telescope surrogate models as the array is a stereoscopic imaging system. The complexity increases as well if the telescopes in the array are of different types. Additionally, the optimum of the array layout depends on the scientific use case. Current array layout optimization are obtained by minimizing the sensitivity of the array, a metric that depends on several high-level parameters such as the trigger efficiency, the energy and angular resolution, as well as the background rejection capability. The variety of telescopes types in IACT arrays, such as in the Cherenkov Telescope Array Observatory (CTAO), not only extends the sensitive energy range but also allows for cross-calibration of the instruments. Therefore, the optimal array layout is not only which minimizes sensitivity but also which reduces the systematic uncertainties. We focus on the optimization of a telescope array based on the SST-1M IACTs in Hanle, Ladakh India aiming at building a generic optimization pipeline for future ground-based cosmic-ray observatories.