Solvent extraction using crown ethers: Selective recovery of potassium from synthetic K-feldspar leachate

The present study focuses on the selective extraction of potassium from a hydrochloric acid-based feldspar leachate using solvent extraction with crown ethers, CE (dibenzo-18-crown-6 and 12-crown-4). The effects of hydrochloric acid concentration, extractant type, diluent, extractant concentration, and organic-to-aqueous phase ratio on potassium extraction efficiency have been examined. Dibenzo-18-crown-6 diluted in m-cresol was shown to preferentially extract potassium (≈85 %) from highly acidic hydrochloric acid solutions (2 to 6 M), with minimal co-extraction of impurities, such as aluminum and sodium, in a single extraction step. Aluminum, however, was shown to be extracted efficiently (≈99 %) at lower acidities (<0.1 M). The extraction mechanisms were explored using various analyses, such as slope analysis, nuclear magnetic resonance, and scanning electron microscopy showing that dibenzo-18-crown-6 forms a highly stable complex with potassium at 1:1 M ratio, (KCl)(CE), driven by the size compatibility between potassium ions and the crown ether cavity. For aluminum, the extraction mechanism likely involves the formation of a cooperative complex where aluminum ions are associated with the potassium-crown ether complex (AlKCl 4 )(CE). Increasing the concentration of hydrochloric acid increased potassium ion activity, chloride ion activity, and ionic strength in the solution. These changes would enhance selective potassium extraction over the formation and extraction of the aluminum‑potassium cooperative complex. • Metal ion size vs. crown ether cavity strongly affects efficiency but is not the only factor. • Ion activity, hydration energy, and aqueous properties govern extraction selectivity. • Potassium and a crown ether with matching cavity can form a stable 1:1 M complex. • Aluminum, with mismatched size, forms a cooperative complex assisted by potassium.