Effect of modulation on the onset of Rayleigh–Bénard convection in superposed fluid and porous layers

The present article investigates the stability of Rayleigh–Bénard convection in a composite system consisting of a horizontal fluid layer overlying a fluid-saturated Darcy porous layer subjected to a time-periodic temperature distribution. The bottom surface is heated periodically with time, whereas a Biot number-dependent thermal boundary condition represents the heat transfer at the upper surface. The Beavers–Joseph–Saffman–Jones condition describes the ‘slip’ at the interface of the domains, and the Lions interface condition governs the normal force balance, incorporating a dynamic pressure term. The Chebyshev tau method and Fourier analysis are utilised to obtain linear instability bounds, which are compared with strong global and asymptotic limits derived from the nonlinear analysis using the energy method. Four deliberately chosen configurations of superposed fluid- and porous-layer systems are investigated. Two configurations validate the analysis through the limiting cases of the classical Darcy–Bénard and Rayleigh–Bénard systems obtained by setting the fluid-to-porous depth ratio $(\hat {d})$ to zero and infinity, respectively. The other two configurations involve layers with equal depths $(\hat {d} =1)$ and a shallow fluid layer overlying a porous layer $(\hat {d} \sim 0.1)$ . For these cases, modulation substantially influences the onset of convection. In the last case, the linear theory points out that modulation parameters can control the dominant convective mode (fluid/porous). Furthermore, unlike the previously reported studies, the nonlinear stability bounds are found to be significantly lower than the linear instability bounds, indicating the possibility of subcritical instabilities in the presence of modulation. The region of subcritical instabilities increases with modulation amplitude.