Increasing the capacitance of flexible supercapacitors by adding spongy-like CNTs on their electrodes and application of CNTs to remove oil/microplastics from tap water

Abstract In this work, spongy-carbon nanotubes were utilized as redox material to enhance the capacitance of graphene-based supercapacitors. Such carbon nanotubes had average diameters of 570 nm and were entangled forming a porous network. Firstly, supercapacitors were constructed only with graphene electrodes and had a capacitance and energy density of 322.12 F g −1 and 44.73 Wh kg −1 , respectively. In contrast, supercapacitors made with electrodes containing Carbon nanotubes had a higher capacitance: 500.16 F g −1 and energy density: 69.46 Wh kg −1 (at room temperature). Thus, the capacitance was enhanced by 55% after introducing the spongy-Carbon nanotubes on the supercapacitor electrodes. Raman analysis and X-ray photoelectron spectroscopy measurements were carried out on the supercapacitor-electrodes and found the presence of oxygen groups and oxygen vacancies defects, which worked as redox centers for the charge storage. Furthermore, the devices made with spongy-carbon nanotubes presented high electrochemical stability because their capacitance retention was above 90% after 1000 cycles of charge–discharge. The supercapacitors were also operated at a low temperature of 2 °C (scarcely reported in the literature) and produced a capacitance and energy density of 432.35 F g −1 and 60.04 Wh kg −1 , respectively. Interestingly, the maximum output voltage of 0.32 V was obtained in the devices operating at 2 °C. Later, the supercapacitor-electrodes made with spongy-carbon nanotubes were recovered and utilized to remove cooking-oil and polystyrene microplastics from contaminated tap water with maximum adsorption capacity of 11.5 g g −1 and 1.2 g g −1 , respectively. Overall, this investigation demonstrated the reuse of SC-electrodes for the elimination of emerging pollutants, which extended the lifetime of spongy-carbon nanotubes and promoted their sustainability. Graphical Abstract

Authors

Institutions

Publication Details

Journal
Journal of Applied Electrochemistry
Published
2025-10-16
DOI
https://doi.org/10.1007/s10800-025-02376-0
Citations
3
Primary Topic
Supercapacitor Materials and Fabrication
Type
article
Field-Weighted Citation Impact
1.28

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Increasing the capacitance of flexible supercapacitors by adding spongy-like CNTs on their electrodes and application of CNTs to remove oil/microplastics from tap water

Luis Ojeda, J. Oliva, Emilio Muñoz‐Sandoval, Jorge H. Quintero‐Orozco et al.
3 citations
Journal of Applied Electrochemistry
Supercapacitor Materials and Fabrication
1.28
article

Increasing the capacitance of flexible supercapacitors by adding spongy-like CNTs on their electrodes and application of CNTs to remove oil/microplastics from tap water

Luis Ojeda, J. Oliva, Emilio Muñoz‐Sandoval, Jorge H. Quintero‐Orozco, P. Salas, A. Encinas, A.I. Mtz-Enríquez
article en
3 citations

Abstract

Abstract In this work, spongy-carbon nanotubes were utilized as redox material to enhance the capacitance of graphene-based supercapacitors. Such carbon nanotubes had average diameters of 570 nm and were entangled forming a porous network. Firstly, supercapacitors were constructed only with graphene electrodes and had a capacitance and energy density of 322.12 F g −1 and 44.73 Wh kg −1 , respectively. In contrast, supercapacitors made with electrodes containing Carbon nanotubes had a higher capacitance: 500.16 F g −1 and energy density: 69.46 Wh kg −1 (at room temperature). Thus, the capacitance was enhanced by 55% after introducing the spongy-Carbon nanotubes on the supercapacitor electrodes. Raman analysis and X-ray photoelectron spectroscopy measurements were carried out on the supercapacitor-electrodes and found the presence of oxygen groups and oxygen vacancies defects, which worked as redox centers for the charge storage. Furthermore, the devices made with spongy-carbon nanotubes presented high electrochemical stability because their capacitance retention was above 90% after 1000 cycles of charge–discharge. The supercapacitors were also operated at a low temperature of 2 °C (scarcely reported in the literature) and produced a capacitance and energy density of 432.35 F g −1 and 60.04 Wh kg −1 , respectively. Interestingly, the maximum output voltage of 0.32 V was obtained in the devices operating at 2 °C. Later, the supercapacitor-electrodes made with spongy-carbon nanotubes were recovered and utilized to remove cooking-oil and polystyrene microplastics from contaminated tap water with maximum adsorption capacity of 11.5 g g −1 and 1.2 g g −1 , respectively. Overall, this investigation demonstrated the reuse of SC-electrodes for the elimination of emerging pollutants, which extended the lifetime of spongy-carbon nanotubes and promoted their sustainability. Graphical Abstract

Journal of Applied ElectrochemistryVol. 55(12)
Institute for Scientific and Technological Research (MX), Instituto Tecnológico de Saltillo (MX), Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (MX), Universidad Nacional Autónoma de México (MX)
Fundación Marcos Moshinsky
Openalex Percentile: Top 18%
Supercapacitor Materials and Fabrication
1.28
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.