Formation of the structural-phase state of titanium-matrix composites reinforced with tic during synthesis and hot pressing, and their testing as ballistic-resistant (bulletproof) protective materials

Ti-40 wt% TiC and Ti-6Al-4 V- 40 wt% TiC metal matrix composites were obtained by the hydrogenated powder metallurgy approach, followed by post-sintering densification by hot pressing. The composites obtained were characterized by high hardness values, which were 700-1300 HV due to nearly-dense microstructure, high content of reinforcing titanium carbide particles and non-uniform redistribution of reinforcing phase in the matrixes. The high hardness of the composites in the as-densified state resulted in a significant improvement of ballistic performance of two-layer Ti-based metal matrix composites. It is shown that the proposed approach for the manufacturing of layered Ti-based metal matrix composites is promising for practical application.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2025-10-16
DOI
https://doi.org/10.1038/s41598-025-20136-0
Citations
1
Primary Topic
Advanced materials and composites
Type
article
Field-Weighted Citation Impact
0.71

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Formation of the structural-phase state of titanium-matrix composites reinforced with tic during synthesis and hot pressing, and their testing as ballistic-resistant (bulletproof) protective materials

Bartosz Fikus, Oleksandr Stasiuk, Anton Osipov, Judyta Sienkiewicz et al.
1 citations
Scientific Reports
Advanced materials and composites
0.71
article

Formation of the structural-phase state of titanium-matrix composites reinforced with tic during synthesis and hot pressing, and their testing as ballistic-resistant (bulletproof) protective materials

Bartosz Fikus, Oleksandr Stasiuk, Anton Osipov, Judyta Sienkiewicz, D. V. Vedel, Jacek Janiszewski, P.E. Markovsky, D. V. Oryshych, Serhii Taran, Krzysztof Piasta, Dmytro G. Savvakin
article en
1 citations

Abstract

Ti-40 wt% TiC and Ti-6Al-4 V- 40 wt% TiC metal matrix composites were obtained by the hydrogenated powder metallurgy approach, followed by post-sintering densification by hot pressing. The composites obtained were characterized by high hardness values, which were 700-1300 HV due to nearly-dense microstructure, high content of reinforcing titanium carbide particles and non-uniform redistribution of reinforcing phase in the matrixes. The high hardness of the composites in the as-densified state resulted in a significant improvement of ballistic performance of two-layer Ti-based metal matrix composites. It is shown that the proposed approach for the manufacturing of layered Ti-based metal matrix composites is promising for practical application.

Scientific ReportsVol. 15(1)
Military University of Technology in Warsaw (PL), Interregional Academy of Personnel Management (UA), Frantsevich Institute for Problems in Materials Science (UA), G.V. Kurdyumov Institute for Metal Physics (UA)
Wojskowa Akademia Techniczna
Openalex Percentile: Top 26%
Advanced materials and composites
0.71
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.