Study on the Effect of Sodium Dodecyl Benzene Sulfonate on Coal Moisture Imbibition and Gas Adsorption

Coal mining has entered the stage of deep mining, and the prevention and control of gas disasters are facing significant challenges. Coal seam water injection, as an effective means of preventing and controlling gas disasters, has dual effects of pressure relief, permeability enhancement, and displacement sodium dodecyl benzene sulfonate (SDBS), as an anionic surfactant, can reduce surface tension to a certain extent in its aqueous solution and is therefore commonly used in coal seam water injection technology. In order to clarify the effect of SDBS on the water absorption capacity of coal and whether it will affect the gas adsorption capacity of coal, imbibition tests were conducted on dried coal samples in different concentrations of SDBS solutions, as well as gas adsorption tests on dried coal samples after imbibition was completed. Research shows that the key concentration range of SDBS for practical application is 0.050–0.075 wt%. When the concentration of SDBS solution is lower than 0.050 wt%, as the concentration of SDBS solution increases, the spontaneous imbibition capacity of coal increases significantly, and the adsorption capacity of coal to gas decreases significantly. When the concentration of SDBS solution is higher than 0.075 wt%, the spontaneous imbibition water capacity and gas adsorption capacity of coal hardly change significantly with the increase in solution concentration. Considering the effects of SDBS on coal water absorption and gas adsorption capacity, as well as environmental protection factors, it is recommended to use SDBS as a surfactant with a solution concentration of 0.050 wt%.