Laser Fabricated MgO-TiO2 Based Photocatalytic Antifogging and Self-Cleaning Surface in Air

A cost-effective laser marker was employed to fabricate a superhydrophilic, photocatalytic Mg-Ti-based surface on glass under ambient conditions. The photocatalytic layer was first deposited via laser processing, followed by partial laser etching to generate micro/nanostructures on the surface. This method preserves partial photocatalytic functionality while enhancing surface roughness and introducing unique nanostructures, enabling the sample to simultaneously exhibit antifogging, self-cleaning capabilities, and high light transmittance. The optimal sample was achieved by tuning laser processing parameters, including repetition rate and scanning hatch distance. It maintained a water contact angle (WCA) of 0° after 15 days of outdoor exposure, which only increased to 21.2° after 30 days. In comparison, the WCA of reference glass increased from an initial 23.3° to 63.9° over the same period. Furthermore, the amount of dust accumulated on the optimal sample was significantly lower—by up to 43%—than that on the reference glass over one month under both indoor and outdoor conditions. After a single spray cleaning, the dust removal efficiency of the indoor-stored optimal sample reached 70%, which was 56% higher than that of the reference. For samples stored outdoors, a single spray removed 67% of the dust from the optimal surface, compared to only 26% for the reference, highlighting its excellent self-cleaning performance. Additionally, the optimal also showcased remarkable antifogging property, which had been maintained over the one-month exposure period without visible degradation. Moreover, the optimal sample exhibited a 2% enhancement in broadband light transmittance across the 400–1000 nm wavelength range, demonstrating strong potential for photovoltaic applications. The simultaneous achievement of antireflection, antifogging, and self-cleaning performance under both indoor and outdoor conditions over a one-month period has rarely been reported in the literature.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2025-10-15
DOI
https://doi.org/10.3390/coatings15101214
Citations
1
Primary Topic
Laser-Ablation Synthesis of Nanoparticles
Type
article
Field-Weighted Citation Impact
0.67
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Laser Fabricated MgO-TiO2 Based Photocatalytic Antifogging and Self-Cleaning Surface in Air

Yongjian Gao, Feiyue Zhang, Chaoran Sun, Jia Liu et al.
1 citations
Coatings
Laser-Ablation Synthesis of Nanoparticles
0.67
article

Laser Fabricated MgO-TiO2 Based Photocatalytic Antifogging and Self-Cleaning Surface in Air

Yongjian Gao, Feiyue Zhang, Chaoran Sun, Jia Liu, Hongtao Cui, Zhangyin Zhai, Yu Wang, Longze Chen
article en
1 citations

Abstract

A cost-effective laser marker was employed to fabricate a superhydrophilic, photocatalytic Mg-Ti-based surface on glass under ambient conditions. The photocatalytic layer was first deposited via laser processing, followed by partial laser etching to generate micro/nanostructures on the surface. This method preserves partial photocatalytic functionality while enhancing surface roughness and introducing unique nanostructures, enabling the sample to simultaneously exhibit antifogging, self-cleaning capabilities, and high light transmittance. The optimal sample was achieved by tuning laser processing parameters, including repetition rate and scanning hatch distance. It maintained a water contact angle (WCA) of 0° after 15 days of outdoor exposure, which only increased to 21.2° after 30 days. In comparison, the WCA of reference glass increased from an initial 23.3° to 63.9° over the same period. Furthermore, the amount of dust accumulated on the optimal sample was significantly lower—by up to 43%—than that on the reference glass over one month under both indoor and outdoor conditions. After a single spray cleaning, the dust removal efficiency of the indoor-stored optimal sample reached 70%, which was 56% higher than that of the reference. For samples stored outdoors, a single spray removed 67% of the dust from the optimal surface, compared to only 26% for the reference, highlighting its excellent self-cleaning performance. Additionally, the optimal also showcased remarkable antifogging property, which had been maintained over the one-month exposure period without visible degradation. Moreover, the optimal sample exhibited a 2% enhancement in broadband light transmittance across the 400–1000 nm wavelength range, demonstrating strong potential for photovoltaic applications. The simultaneous achievement of antireflection, antifogging, and self-cleaning performance under both indoor and outdoor conditions over a one-month period has rarely been reported in the literature.

CoatingsVol. 15(10)
Qingdao University of Science and Technology (CN), Qingdao University of Technology (CN)
Openalex Percentile: Top 26%
Laser-Ablation Synthesis of Nanoparticles
0.67
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.