Optical and Thermal Studies, Isothermal Crystallization Kinetics and Mechanical Properties of Poly(lactic acid) Nanocomposites Based on Hybrid Lignin/MWCNT Nanomaterial

A depth study of optical, isothermal crystallization and mechanical properties was conducted on a series of poly(lactic acid) (PLA) nanocomposites based on lignin/multi-walled carbon nanotubes (MWCNTs) hybrid nanomaterial. The preparation was performed via solution casting followed by melt mixing. For comparison reasons, a group of PLA/lignin polymeric materials were prepared. Infrared spectroscopy (FTIR) did not reveal any significant impact on the main peaks of the nanocomposites by the incorporation of the additives. The optical properties were strongly affected by the content of the additive, as long as the thermal transitions parameters as evaluated from the differential scanning calorimetry (DSC) show important differences between cold and melt crystallization. X-ray diffraction (XRD) showed the semicrystalline behavior of the materials, while during isothermal crystallization experiments, the hybrid conductive nanomaterial acted as nucleation agent by promoting crystallization. Under evaluation of the mechanical properties, Young’s modulus tensile parameter increased significantly while the content of the hybrid nanomaterial increased, and the bending experiments of the materials with low content of the additives did not break. Thus, these substrates could be promising candidates for engineering applications, such as printed electronics.