Evaluating Disinfection Performance and Energy Efficiency of a Dual-Wavelength UV-LED Flow-Through Device for Point-of-Use Water Treatment

Ultraviolet-light emitting diodes (UV-LEDs) offer several advantages over conventional mercury-based UV lamps, including wavelength selectivity, compact size, design flexibility, instant on/off, power output adjustment, and mercury-free operation. These features position UV-LEDs as ideal candidates for point-of-use (POU) water disinfection systems, particularly in decentralized or resource-limited environments. In this study, we evaluated the microbial inactivation performance and energy efficiency of a bench-scale flow-through UV-LED POU system using indigenous heterotrophic plate count (HPC) bacteria, E. coli, and MS2 bacteriophage. The system was tested under various flow rates (1–4 L/min) and wavelength configurations (265 nm, 278 nm, and dual-wavelength combinations). MS2 bacteriophage was further used in collimated beam testing to validate UV-fluence-response curves and to estimate delivered doses in the flow-through POU device. HPC inactivation was enhanced under dual-wavelength conditions, suggesting wavelength-specific synergy, while E. coli showed high susceptibility across all wavelength configurations, achieving >2-log inactivation at significantly reduced UV-LED power (1/6 of that required for HPC) even at 4 L/min. Specific energy consumption analysis showed energy demands as low as 0.032–0.053 kWh/m3 for achieving 4-log inactivation of E. coli, with an estimated annual operating cost for UV-LED irradiation below $1.70. These findings demonstrate the potential of UV-LED-based POU devices as safe, energy-efficient, and cost-effective technologies for decentralized water treatment.