Techno-economic assessment of Power-to-Ammonia-to-Power for long-term energy storage

• Comparison of green hydrogen and green ammonia for renewable energy storage. • Integration of detailed kinetics in a Power-to-Ammonia-to-Power simulation. • Evaluation of LCOE for hydrogen-based system and ammonia-based system across different load profiles. • Assessment of battery integration, showing LCOE reduction in most scenarios. • The economic viability of ammonia as a storage solution depends strongly on the load profile. Hydrogen produced via electrolysis represents a promising solution for renewable energy storage due to its high gravimetric energy density. However, its low volumetric density requires storage under extreme conditions, raising costs and safety concerns. An alternative approach involves converting hydrogen into other chemicals. Among them, ammonia offers higher volumetric energy density and lower tanks cost than hydrogen, stability under ambient conditions, and an existing transport infrastructure. This study evaluates the techno-economic feasibility of green ammonia as an energy storage medium compared to green hydrogen. Green ammonia is synthesized using renewable electricity to power an electrolyzer, an air separation unit, and a Haber-Bosch reactor. Stored ammonia is later reconverted into electricity via a combined cycle gas turbine. The system is modeled using MESS, an open-source software developed at the University of Florence. The ammonia synthesis plant model includes reaction kinetics and flexible operation. System sizing is performed by minimizing the Levelized Cost of Electricity (LCOE), assuming a 4 MW electricity demand at each hourly step over a year, fully supplied by photovoltaics coupled with ammonia or hydrogen storage. A sensitivity analysis on the load profile reveals that ammonia is more cost-effective for long-duration storage, provided reactor operation is properly controlled. Under constant and winter–peaked demand, ammonia achieves LCOEs of 0.529 €/kWh and 0.666 €/kWh, outperforming hydrogen at 0.575 €/kWh and 1.209 €/kWh. With summer-peaked demand, characterized by short–term storage needs, hydrogen reaches 0.343 €/kWh, whereas ammonia 0.483 €/kWh. Battery-integrated variants are also assessed, reducing LCOE in all scenarios except for the hydrogen-based system under summer-peaked demand.

Authors

Institutions

Publication Details

Journal
Energy Conversion and Management
Published
2025-10-14
DOI
https://doi.org/10.1016/j.enconman.2025.120621
Citations
3
Primary Topic
Ammonia Synthesis and Nitrogen Reduction
Type
article
Field-Weighted Citation Impact
1.17
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Techno-economic assessment of Power-to-Ammonia-to-Power for long-term energy storage

Marco Pagliai, Carlo Carcasci, Valentina Veltroni, Mattia Calabrese
3 citations
Energy Conversion and Management
Ammonia Synthesis and Nitrogen Reduction
1.17
article

Techno-economic assessment of Power-to-Ammonia-to-Power for long-term energy storage

Marco Pagliai, Carlo Carcasci, Valentina Veltroni, Mattia Calabrese
article en
3 citations

Abstract

• Comparison of green hydrogen and green ammonia for renewable energy storage. • Integration of detailed kinetics in a Power-to-Ammonia-to-Power simulation. • Evaluation of LCOE for hydrogen-based system and ammonia-based system across different load profiles. • Assessment of battery integration, showing LCOE reduction in most scenarios. • The economic viability of ammonia as a storage solution depends strongly on the load profile. Hydrogen produced via electrolysis represents a promising solution for renewable energy storage due to its high gravimetric energy density. However, its low volumetric density requires storage under extreme conditions, raising costs and safety concerns. An alternative approach involves converting hydrogen into other chemicals. Among them, ammonia offers higher volumetric energy density and lower tanks cost than hydrogen, stability under ambient conditions, and an existing transport infrastructure. This study evaluates the techno-economic feasibility of green ammonia as an energy storage medium compared to green hydrogen. Green ammonia is synthesized using renewable electricity to power an electrolyzer, an air separation unit, and a Haber-Bosch reactor. Stored ammonia is later reconverted into electricity via a combined cycle gas turbine. The system is modeled using MESS, an open-source software developed at the University of Florence. The ammonia synthesis plant model includes reaction kinetics and flexible operation. System sizing is performed by minimizing the Levelized Cost of Electricity (LCOE), assuming a 4 MW electricity demand at each hourly step over a year, fully supplied by photovoltaics coupled with ammonia or hydrogen storage. A sensitivity analysis on the load profile reveals that ammonia is more cost-effective for long-duration storage, provided reactor operation is properly controlled. Under constant and winter–peaked demand, ammonia achieves LCOEs of 0.529 €/kWh and 0.666 €/kWh, outperforming hydrogen at 0.575 €/kWh and 1.209 €/kWh. With summer-peaked demand, characterized by short–term storage needs, hydrogen reaches 0.343 €/kWh, whereas ammonia 0.483 €/kWh. Battery-integrated variants are also assessed, reducing LCOE in all scenarios except for the hydrogen-based system under summer-peaked demand.

Energy Conversion and ManagementVol. 348
University of Florence (IT)
Openalex Percentile: Top 20%
Ammonia Synthesis and Nitrogen Reduction
1.17
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.