Study on the Emission Characteristics of Fine Particulate Matter in the White Mud Desulfurization Process

White mud is a promising desulfurizing agent, but the risk of fine particulate emissions exists during its application. This study investigated the fine particulate emissions in the white mud desulfurization process and analyzed the effects of process parameters, including gas-to-liquid ratio, empty tower gas velocity, and slurry concentration, on particulate emissions. The results showed that white mud desulfurization achieved effective SO2 removal, with a removal efficiency ranging from 93.5% to 95.8%. However, the emission of fine particulates was found to be a significant environmental concern. At a slurry concentration of 15%, the fine particulate number concentration was found to be 5.9 × 106 particles/cm3, with a mass concentration of approximately 43.2 mg/m3. The study further revealed that increasing the empty tower gas velocity from 2.5 m/s to 4.5 m/s also significantly increased particulate emissions. Similarly, increasing the gas-to-liquid ratio from 10 L/m3 to 15 L/m3 led to a 25.5% increase in the fine particulate number concentration. These changes were attributed to the increased atomization of fine droplets and the enhanced gas–liquid relative movement, which facilitated the entrainment of more fine particulates into the flue gas. While improving the slurry concentration led to better desulfurization efficiency, these adjustments also resulted in higher fine particulate emissions. Therefore, optimizing process parameters to balance desulfurization efficiency and fine particulate emission control was crucial for practical applications.