Multi-Dimensional Uniform Cooling Process for Ship Plate Steel Continuous Casting

In slab continuous casting, achieving uniform cooling in the secondary cooling zone is essential for ensuring both surface integrity and internal quality. To optimize the process for ship plate steel, a solidification heat transfer model was developed, incorporating radiation, water film evaporation, spray impingement, and roll contact. The influence of secondary cooling water flow on slab temperature distribution was systematically investigated from multiple perspectives. The results show that a weak cooling strategy is crucial for maintaining higher surface temperatures and aligning the solidification endpoint with the soft reduction zone. Along the casting direction, a “strong-to-weak” cooling pattern effectively prevents abrupt temperature fluctuations, while reducing the inner-to-outer arc water ratio from 1.0 to 0.74 mitigates transverse thermal gradients. In addition, shutting off selected nozzles in the later stage of secondary cooling at medium and low casting speeds increases the slab corner temperature in the straightening zone by approximately 50 °C, thereby avoiding brittle temperature ranges. Overall, the proposed multi-dimensional uniform cooling strategy reduces temperature fluctuations and significantly improves slab quality, demonstrating strong potential for industrial application.