Design of a High-Gain Antenna System for MM-Wave Full-Duplex Communication

Advanced antenna designs are crucial for millimeter-wave (mmWave) 5&6G communication to support higher data rates, lower latency, and reduced power consumption. These demands can be partially met through wideband antenna arrays, while full-duplex radios further enhance spectral efficiency by enabling simultaneous transmission and reception in the same band. This paper proposes a patch antenna array architecture for full-duplex mmWave applications, which can significantly mitigate self-interference at the antenna stage. The array achieves broadside symmetrical radiation patterns and exhibits exceptional isolation characteristics, making it well-suited for mmWave full-duplex operation. Simulation results demonstrate a gain of circa 17.5 dB, self-interference (SI) isolation less than −55 dB reaching to −85 dB between the transmit (Tx) and receive (Rx) ports, and mutual coupling (MC) level below −10 dB reaching to −16.5 dB within the Tx and the sampling (Rs) port, across the 26-27 GHz band. Additionally, the proposed design achieves a radiation efficiency of approximately 90%.

Authors

Institutions

Publication Details

Published
2025-09-08
DOI
https://doi.org/10.1109/apwc65665.2025.11190474
Primary Topic
Full-Duplex Wireless Communications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Design of a High-Gain Antenna System for MM-Wave Full-Duplex Communication

Uros Jankovic, D. Mirshekar‐Syahkal, D. Budimir, Shahin Salarian et al.
Full-Duplex Wireless Communications
article

Design of a High-Gain Antenna System for MM-Wave Full-Duplex Communication

Uros Jankovic, D. Mirshekar‐Syahkal, D. Budimir, Shahin Salarian, Rawad Asfour
article en

Abstract

Advanced antenna designs are crucial for millimeter-wave (mmWave) 5&6G communication to support higher data rates, lower latency, and reduced power consumption. These demands can be partially met through wideband antenna arrays, while full-duplex radios further enhance spectral efficiency by enabling simultaneous transmission and reception in the same band. This paper proposes a patch antenna array architecture for full-duplex mmWave applications, which can significantly mitigate self-interference at the antenna stage. The array achieves broadside symmetrical radiation patterns and exhibits exceptional isolation characteristics, making it well-suited for mmWave full-duplex operation. Simulation results demonstrate a gain of circa 17.5 dB, self-interference (SI) isolation less than −55 dB reaching to −85 dB between the transmit (Tx) and receive (Rx) ports, and mutual coupling (MC) level below −10 dB reaching to −16.5 dB within the Tx and the sampling (Rs) port, across the 26-27 GHz band. Additionally, the proposed design achieves a radiation efficiency of approximately 90%.

University of Essex (GB), University of Westminster (GB)
Openalex Percentile: Top 71%
Full-Duplex Wireless Communications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Design of a High-Gain Antenna System for MM-Wave Full-Duplex Communication — Uros Jankovic, D. Mirshekar‐Syahkal, et al. · (2025) | TGRS Research Map | TGRS