Microstructure and Properties of Binderless μWC Obtained Using the Electroconsolidation Method

This paper contributes to the knowledge of binderless tungsten carbide (WC), which attracts the attention of many engineers and scientists for its superior properties, but its application is limited due to difficulties with the consolidation of initial powders. In the present study, the microstructure and mechanical properties of binderless WC, sintered with the electroconsolidation technique from the initial powder of a grain size of 100-200 nm, were investigated. The material was compared with nWC sintered with the same method from a nanopowder with particles of size ca. 70 nm. The binderless μWC demonstrated hardness of <i>HV</i> = 30.06 ± 0.09 GPa, which is almost 14% higher than that of nWC, but its fracture toughness was lower (<i>K<sub>IC</sub></i> = 6.59 ± 0.46 MPa·m<sup>1/2</sup> under 1 kg load). These differences can be attributed to the improved homogeneity of the μWC microstructure, where no large agglomerates appeared to be present in nWC. The measured plastic properties, with no signs of brittle fracture, further confirm the applicability of the binderless WC under contact stress conditions.

Authors

Institutions

Publication Details

Journal
Materials
Published
2025-10-10
DOI
https://doi.org/10.3390/ma18204646
Citations
1
Primary Topic
Advanced ceramic materials synthesis
Type
article
Field-Weighted Citation Impact
0.73

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Microstructure and Properties of Binderless μWC Obtained Using the Electroconsolidation Method

Waldemar Samociuk, Mirosław Rucki, S. V. Lytovchenko, Volodymyr Pavlovych Nerubatskyi et al.
1 citations
Materials
Advanced ceramic materials synthesis
0.73
article

Microstructure and Properties of Binderless μWC Obtained Using the Electroconsolidation Method

Waldemar Samociuk, Mirosław Rucki, S. V. Lytovchenko, Volodymyr Pavlovych Nerubatskyi, Daniel Pieniak, Dmitrij Morozow, Jacek Caban, Vitalii Kulich, Leszek Chałko, Volodymyr Chyshkala, É. S. Gevorkyan, Zbigniew Krzysiak
article en
1 citations

Abstract

This paper contributes to the knowledge of binderless tungsten carbide (WC), which attracts the attention of many engineers and scientists for its superior properties, but its application is limited due to difficulties with the consolidation of initial powders. In the present study, the microstructure and mechanical properties of binderless WC, sintered with the electroconsolidation technique from the initial powder of a grain size of 100-200 nm, were investigated. The material was compared with nWC sintered with the same method from a nanopowder with particles of size ca. 70 nm. The binderless μWC demonstrated hardness of <i>HV</i> = 30.06 ± 0.09 GPa, which is almost 14% higher than that of nWC, but its fracture toughness was lower (<i>K<sub>IC</sub></i> = 6.59 ± 0.46 MPa·m<sup>1/2</sup> under 1 kg load). These differences can be attributed to the improved homogeneity of the μWC microstructure, where no large agglomerates appeared to be present in nWC. The measured plastic properties, with no signs of brittle fracture, further confirm the applicability of the binderless WC under contact stress conditions.

MaterialsVol. 18(20)
University of Life Sciences in Lublin (PL), Vilnius Gediminas Technical University (LT), Kazimierz Pułaski University of Technology and Humanities in Radom (PL), Łukasiewicz - Institute for Sustainable Technologies (PL), Ukrainian State University of Railway Transport (UA), V. Bakul Institute for Superhard Materials (UA), Lublin University of Technology (PL), V. N. Karazin Kharkiv National University (UA)
European Commission
Openalex Percentile: Top 29%
Advanced ceramic materials synthesis
0.73
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.