Influence of Particle Size on the Phytochemical Profile of Manihot Esculenta Leaf Extracts: An LC-MS-Based Analysis

Introduction: Extraction is a key step in the study of organic compounds derived from plants. Over time, numerous methods and techniques have been developed to obtain extracts concentrated in bioactive compounds. Aims: This study aims to identify and characterize, using liquid chromatography-mass spectrometry (LC-MS), the phytocompounds present in ethanol extracts obtained from the crushed and sieved leaves of Manihot esculenta, with a view to comparing the chemical composition of these two forms of preparation. Study Design: The research adopts an experimental, analytical, and comparative design aimed at identifying and comparing the phytochemicals present in the ethanol extracts of the crushed and sieved leaves of Manihot esculenta by LC-MS. Place and Duration of Study: Laboratory of Bio-Organic Chemistry and Natural Substances, Nangui ABROGOUA University, Abidjan, Ivory Coast, between January 2025 and July 2025. Methodology: After drying, the plant material was ground to obtain a powder known as Broyat. This was then sieved using a 1 mm mesh to produce Tamisat. The ethanol extracts were prepared by Soxhlet extraction, using a liquid-liquid contact process. Phytochemical screening was performed using identification tests based on color reactions in test tubes. Finally, the study was completed by LC-MS analysis performed in positive mode. Results: Qualitative phytochemical screening revealed the presence of polyphenols, flavonoids, coumarins, tannins, and sterols/terpenes in both matrices, confirming the chemical richness of the species. LC-MS analysis then revealed six bioactive compounds in the Broyat, including scopoletin, scopolin, rutin, nicotiflorin, caffeic acid, and gallic acid, while the Tamisat had a more limited composition, notably lacking hydroxycoumarins such as scopoletin and scopolin. Conclusion: Sieving (“Tamisat”) resulted in a loss of specific classes of compounds compared to the ground powder (“Broyat”). These results highlight the influence of preparation methods on the metabolic profile obtained. Functionally, the compounds identified are known for their antioxidant, anti-inflammatory, and antidiabetic properties, thus giving M. esculenta leaves potential interest for biomedical and nutritional applications.

Authors

Publication Details

Journal
Asian Journal of Physical and Chemical Sciences
Published
2025-10-08
DOI
https://doi.org/10.9734/ajopacs/2025/v13i4265
Primary Topic
Heavy Metals in Plants
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Influence of Particle Size on the Phytochemical Profile of Manihot Esculenta Leaf Extracts: An LC-MS-Based Analysis

Mamyrbékova-Békro Janat Akhanovna, Ouattara Logopho Hyacinthe, N’guessan Patrick Audrey, Mouho Guéi Didier Roselin et al.
Asian Journal of Physical and Chemical Sciences
Heavy Metals in Plants
article

Influence of Particle Size on the Phytochemical Profile of Manihot Esculenta Leaf Extracts: An LC-MS-Based Analysis

Mamyrbékova-Békro Janat Akhanovna, Ouattara Logopho Hyacinthe, N’guessan Patrick Audrey, Mouho Guéi Didier Roselin, N’guessan Djagna Michael, Békro Yves-Alain
article en

Abstract

Introduction: Extraction is a key step in the study of organic compounds derived from plants. Over time, numerous methods and techniques have been developed to obtain extracts concentrated in bioactive compounds. Aims: This study aims to identify and characterize, using liquid chromatography-mass spectrometry (LC-MS), the phytocompounds present in ethanol extracts obtained from the crushed and sieved leaves of Manihot esculenta, with a view to comparing the chemical composition of these two forms of preparation. Study Design: The research adopts an experimental, analytical, and comparative design aimed at identifying and comparing the phytochemicals present in the ethanol extracts of the crushed and sieved leaves of Manihot esculenta by LC-MS. Place and Duration of Study: Laboratory of Bio-Organic Chemistry and Natural Substances, Nangui ABROGOUA University, Abidjan, Ivory Coast, between January 2025 and July 2025. Methodology: After drying, the plant material was ground to obtain a powder known as Broyat. This was then sieved using a 1 mm mesh to produce Tamisat. The ethanol extracts were prepared by Soxhlet extraction, using a liquid-liquid contact process. Phytochemical screening was performed using identification tests based on color reactions in test tubes. Finally, the study was completed by LC-MS analysis performed in positive mode. Results: Qualitative phytochemical screening revealed the presence of polyphenols, flavonoids, coumarins, tannins, and sterols/terpenes in both matrices, confirming the chemical richness of the species. LC-MS analysis then revealed six bioactive compounds in the Broyat, including scopoletin, scopolin, rutin, nicotiflorin, caffeic acid, and gallic acid, while the Tamisat had a more limited composition, notably lacking hydroxycoumarins such as scopoletin and scopolin. Conclusion: Sieving (“Tamisat”) resulted in a loss of specific classes of compounds compared to the ground powder (“Broyat”). These results highlight the influence of preparation methods on the metabolic profile obtained. Functionally, the compounds identified are known for their antioxidant, anti-inflammatory, and antidiabetic properties, thus giving M. esculenta leaves potential interest for biomedical and nutritional applications.

Asian Journal of Physical and Chemical SciencesVol. 13(4)
Openalex Percentile: Top 68%
Heavy Metals in Plants
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.