Enhanced torque control for horizontal-axis wind turbines via disturbance observer assistance

This paper presents an enhanced control strategy for optimizing energy capture in horizontal axis wind turbines operating in the partial-load region (region 2). The proposed approach builds upon conventional standard torque control (STC) by incorporating a generalized extended state observer (GESO) that follows the active-disturbance-rejection paradigm. Although traditional torque control methods have proven effective under steady wind conditions, they often lack robustness against disturbances, system faults, and model uncertainties inherent in wind energy systems. The proposed observer-assisted control scheme addresses these limitations by estimating and compensating for total disturbance signals, including non-modeled dynamics, parameter uncertainties, and actuator faults. The effectiveness of the proposed control strategy is validated through comprehensive simulations using a 5 MW wind turbine model subjected to realistic operational conditions. Simulation scenarios include turbulent wind speed profiles and actuator degradation to assess controller performance. The results demonstrate improved robustness and energy capture efficiency compared to the conventional control approach, while maintaining the simplicity of the implementation. This work contributes to the development of more reliable wind energy conversion systems (WECSs) by offering a practical solution that improves both performance and fault tolerance in partial load operation.