Control of Precipitation of Cellulose Solutions in N-Methylmorpholine-N-oxide by Introducing Polyacrylonitrile Additives

The precipitation of cellulose and polyacrylonitrile and its copolymer (PAN) solutions is a well-known process that has been extensively described in numerous studies. It is suggested that “soft” precipitants (aqueous solutions of solvent, alcohols) be used in place of “rigid” ones (water) to control the rate at which solutions precipitate. Diffusion processes can also be controlled by lowering the temperature of the interacting system’s constituent parts. The appearance and structure of the resulting fibers (films) are directly correlated with the rate of coagulation. Adding a composite additive to the solution is an unusual method of altering the rate of polymer phase release. The introduced additive should dissolve in a common solvent, which will ensure the competition of precipitation between the polymer phases. It is shown that using optical methods it is possible to trace the evolution of the polymer phase precipitation and the formed morphology. For 12% solutions of cellulose, PAN and mixed systems in N-methylmorpholine-N-oxide (NMMO) the kinetics of the movement of isoconcentration planes was traced and the growth rates of the precipitated polymer zone were estimated. The introduction of PAN additives into cellulose enables the influence of diffusion processes and minimizes the formation of finger-like defects (vacuoles). When the PAN content in the system is 30% or more, the formation of defects in the precipitated solution is significantly suppressed, which is crucial for achieving a uniform morphology.