Accessible Thermoelectric Characterization: Development and Validation of Two Modular Room Temperature Measurement Instruments

This paper describes two low-cost, modular instruments developed for rapid room-temperature characterization of mainly thermoelectrics. The first instrument measures the Seebeck coefficient across diverse sample geometries and incorporates a four-point probe configuration for simultaneous electrical conductivity measurement, including disk-shaped samples. The second instrument implements the Van der Pauw method, enabling detailed investigation of charge carrier behavior within materials. Both devices prioritize accessibility, constructed primarily from 3D-printed components, basic hardware, and readily available instrumentation, ensuring ease of reproduction and modification. A unique calibration protocol using pure elemental disks and materials with well-established properties was employed for both instruments. Validation against comparable systems confirmed reliable operation. Control and data acquisition software for both devices was developed in-house and is fully documented and does not require an experienced operator. We demonstrate the utility of these instruments by characterizing the electronic properties of polycrystalline SnSe thermoelectric materials doped with Bi, Ag, and In. The results reveal highly complex charge carrier behavior significantly influenced by both dopant type and concentration.