Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures (Adv. Mater. Technol. 19/2024)
Fast Cure Silicone Inks In article number 2400423, Anna Guell Izard and co-workers present a silicone gyroid with 80% porosity, 250 µm wall thickness, printed with Fast Cure silicone ink. Fast Cure silicone in direct ink write additive manufacturing enables the acquisition of previously unattainable structures, such as tall or overhanging structures, or structures comprising thin walls. Such structures are obtained thanks to the quick gelling process.
Authors
- Jeremy M. Lenhardt (ORCID: https://orcid.org/0000-0003-0643-9543)
- Anna Güell Izard (ORCID: https://orcid.org/0000-0002-4416-7609)
- Alexandra M. Golobic (ORCID: https://orcid.org/0000-0001-5650-9293)
- Eric B. Duoss (ORCID: https://orcid.org/0000-0002-5473-2528)
- Ilse M. Van Meerbeek (ORCID: https://orcid.org/0000-0002-1258-132X)
- Lemuel X. Pérez Pérez
- Todd H. Weisgraber (ORCID: https://orcid.org/0000-0001-5183-9525)
Institutions
- Lawrence Livermore National Laboratory (US)
Publication Details
- Journal
- Advanced Materials Technologies
- Published
- 2024-10-01
- DOI
- https://doi.org/10.1002/admt.202470086
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00