Behavior of Composite Concrete-Filled Double-Web Steel Beams: A Numerical and Experimental Investigation

This study investigates the structural behavior of composite double-web steel beams filled with different types of concrete made from a combination of recycled concrete aggregates and normal aggregates. The research includes both experimental and numerical analyses. Seven specimens were tested under symmetrical two-point loading, all having identical geometric properties: a span length of 1100 mm, flange plates 120 mm wide and 6 mm thick, and web plates 3 mm thick and 188 mm deep. The specimens were divided into two groups, with a control beam without concrete infill. Group one included beams filled with normal concrete in different locations (middle region, two sides, and fully filled), while group two mirrored the same fill locations but used recycled concrete instead. The experimental results showed that using normal concrete improved the ultimate load by 10.19% to 55.30%, with the fully filled beam achieving a maximum increase in ductility of about 568% and a stiffness improvement ranging from 2.6% to 39% compared to the control beam. Beams filled with recycled concrete showed increases in ultimate load from 9.52% to 42.03%, ductility improvements of up to 380%, and stiffness enhancements between 4.5% and 8.03%. Numerical modeling using ABAQUS (2021) showed excellent agreement with the experimental results, with differences in ultimate load and maximum deflection averaging 5.5% and 7.9%, respectively.