Enhanced visible-light photodegradation of ciprofloxacin via Co<sup>2+</sup>-doped Zn-Al LDH with persulfate activation

Abstract Pharmaceutical residues, particularly ciprofloxacin (CIP), are frequently detected in aquatic environments and pose significant risks to ecosystems and human health. This study investigates the visible-light photocatalytic degradation of CIP using Co 2+ -modified Zn 0.667 Al 0.333 -layered double hydroxide (LDH) materials, with persulfate (PS) as a co-activator. The hydrotalcite-like compounds Zn 0.667 Al 0.333 (OH) 2 (CO 3 ) 0.167 ·0.5H 2 O, denoted as nCoZnH, were synthesized by co-precipitation. These were further calcined at 500 °C for 5 h to obtain nCoZnH500. Both uncalcined and calcined materials were characterized structurally and physicochemically. Results revealed that nCoZnH maintained the typical hydrotalcite layered structure, with Co 2+ ions effectively incorporated into brucite-like layers through isomorphic substitution of Zn 2+ . Upon calcination, partial retention of the LDH structure was observed, accompanied by the formation of ZnO and Co 3 O 4 phases. The BET surface area of nCoZnH500 was markedly higher than that of uncalcined counterparts. Co 2+ modification also significantly reduced the bandgap energy, thereby enhancing visible-light-induced photocatalytic activity. Among all samples, 1.0CoZnH and 2.0CoZnH500 exhibited the highest degradation efficiencies, 78.0 ± 1.87% and 70.9 ± 2.31%, respectively, for 10 ppm CIP under visible light. Furthermore, the photocatalytic activity of the synthesized materials was influenced by the Co: Al molar ratio, initial CIP concentration, persulfate (S 2 O 8 2− ) dosage, and solution pH. The 2.0CoZnH500 sample demonstrated superior stability compared to 1.0CoZnH, with only a 9.1% reduction in the CIP removal efficiency after four consecutive cycles, maintaining a degradation efficiency of 59.7%. These findings indicate that the synergy between Co 2+ doping and PS activation effectively boosts CIP degradation. The developed materials offer promising potential for the treatment of pharmaceutical wastewater under visible light irradiation.

Authors

Institutions

Publication Details

Journal
Physica Scripta
Published
2025-10-01
DOI
https://doi.org/10.1088/1402-4896/ae0ecb
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Enhanced visible-light photodegradation of ciprofloxacin via Co2+-doped Zn-Al LDH with persulfate activation

Thị Chinh Ngo, Truong Xuan Vuong, Van Nhuong Vu, Thi Nghiem Vu et al.
Physica Scripta
Advanced Photocatalysis Techniques
article

Enhanced visible-light photodegradation of ciprofloxacin via Co2+-doped Zn-Al LDH with persulfate activation

Thị Chinh Ngo, Truong Xuan Vuong, Van Nhuong Vu, Thi Nghiem Vu, Thi Nhung Tran
article en

Abstract

Abstract Pharmaceutical residues, particularly ciprofloxacin (CIP), are frequently detected in aquatic environments and pose significant risks to ecosystems and human health. This study investigates the visible-light photocatalytic degradation of CIP using Co 2+ -modified Zn 0.667 Al 0.333 -layered double hydroxide (LDH) materials, with persulfate (PS) as a co-activator. The hydrotalcite-like compounds Zn 0.667 Al 0.333 (OH) 2 (CO 3 ) 0.167 ·0.5H 2 O, denoted as nCoZnH, were synthesized by co-precipitation. These were further calcined at 500 °C for 5 h to obtain nCoZnH500. Both uncalcined and calcined materials were characterized structurally and physicochemically. Results revealed that nCoZnH maintained the typical hydrotalcite layered structure, with Co 2+ ions effectively incorporated into brucite-like layers through isomorphic substitution of Zn 2+ . Upon calcination, partial retention of the LDH structure was observed, accompanied by the formation of ZnO and Co 3 O 4 phases. The BET surface area of nCoZnH500 was markedly higher than that of uncalcined counterparts. Co 2+ modification also significantly reduced the bandgap energy, thereby enhancing visible-light-induced photocatalytic activity. Among all samples, 1.0CoZnH and 2.0CoZnH500 exhibited the highest degradation efficiencies, 78.0 ± 1.87% and 70.9 ± 2.31%, respectively, for 10 ppm CIP under visible light. Furthermore, the photocatalytic activity of the synthesized materials was influenced by the Co: Al molar ratio, initial CIP concentration, persulfate (S 2 O 8 2− ) dosage, and solution pH. The 2.0CoZnH500 sample demonstrated superior stability compared to 1.0CoZnH, with only a 9.1% reduction in the CIP removal efficiency after four consecutive cycles, maintaining a degradation efficiency of 59.7%. These findings indicate that the synergy between Co 2+ doping and PS activation effectively boosts CIP degradation. The developed materials offer promising potential for the treatment of pharmaceutical wastewater under visible light irradiation.

Physica ScriptaVol. 100(10)
Thai Nguyen University (VN), Thai Nguyen University Of Education
Openalex Percentile: Top 82%
Advanced Photocatalysis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.