Analysis of the Mechanical Properties of the AlSi7CrMnCu2.5 Alloy and Their Changes After Heat Treatment

The article deals with the analysis of the mechanical properties of the newly designed aluminum alloy Al-Si7CrMnCu2.5. The research was carried out in order to map a new alloy with a certain addition of chromium and manganese from the point of view of mechanical properties and their changes after heat treatment (hardening, artificial aging) with defined parameters. Specifically, properties such as strength limit, yield strength, ductility, hardness, and microhardness were analyzed, both in the cast state and after heat treatment. The alloy was designed as an alternative to the standard Al-Si alloys already used in practice (AlSi7Mg, AlSi7Mg0.3, AlSi8Cu2Mn, AlSi8Cu3), which are mainly used in the production of engine parts and other components for the automotive and aviation industries. As can be seen from the presented results, the experimental AlSi7CrMnCu2.5 alloy exceeds the properties of the other selected alloys by tens of percent already in the cast state in many parameters. After heat treatment, the results achieved are comparable to the mentioned alloys, and in most cases, their values exceed them, especially in terms of ductility and hardness.