Study on the Fracture Characteristics and Mechanism of Used Drip Irrigation Tape Under Different Stretching Speeds

The crushing of used drip irrigation tape is a crucial step in the recycling and reuse of drip irrigation tapes. Incomplete crushing and low efficiency are among the main factors restricting its reprocessing. Investigating the fracture characteristics and the mechanism of fracture during the crushing process is key to solving this problem. Therefore, this study constructs a stretching fracture platform to investigate the influence of stretching speed on the fracture characteristics and reveals the fracture mechanism by analyzing fracture morphology, force-displacement curves, fracture energy, and microstructure. The results show that as the speed increases, the limit strain decreased from 117.7% to 38.7%, and the fracture location always occurs at the junction between the necked and non-necked area, the fracture mode transitions from ductile fracture to brittle fracture, the deformation mode shifts from being dominated by elastoplastic deformation to being dominated by elastic deformation, and the mechanical response curve changes from five stages to three stages. When the stretching speed increases from 60 mm/s to 70 mm/s, a jump phenomenon is observed in macroscopic and microscopic. As the speed increases, the total energy absorbed by the drip irrigation tape decreases from 1.29 × 10−2 J/mm3 to 0.39 × 10−2 J/mm3. Brittle fracture primarily absorbs energy for the disintegration and fracture of lamellae in the spherulites at the fracture surface. Ductile fracture primarily absorbs energy for the extension of the fibrous structure, and the mechanical properties of the necked area are strengthened, which leads to the fracture location always occurring at the junction between the necked and non-necked area.