Mid-infrared single-pixel imaging via two-photon optical encoding

Abstract Mid-infrared (MIR) imaging offers powerful capabilities for label-free chemical analysis, yet its practical deployment remains hindered by the high cost and cryogenic complexity of conventional cameras. Two-photon absorption (TPA) provides a promising route to room-temperature MIR detection, but existing TPA imagers based on raster scanning or array detectors are constrained by slow acquisition speed or limited detection sensitivity. Here we present a scanning-free MIR single-pixel imaging approach based on non-degenerate TPA in a silicon detector. The involved spatial encoding is realized by a near-infrared structured pump with a resolution of 7 $$\mu$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>μ</mml:mi> </mml:math> m, thus allowing high-fidelity MIR optical modulation through the phase-matching-free nonlinear interaction. Consequently, the spatially modulated TPA response is intrinsically integrated in the single-element photodetector, which favors computational reconstruction of the impinging MIR image by correlating measured intensities and predetermined patterns. Notably, the use of advanced algorithms of compressed sensing and deep learning facilitate image recovery under sub-Nyquist sampling with a compression ratio of 10% and photon-starved illumination with an incident light flux of 0.5 pJ/pulse. Furthermore, a multispectral imaging over 2.5-3.8 $$\mu$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>μ</mml:mi> </mml:math> m is manifested for chemical discrimination of plastic films. The presented architecture would offer a broadband and sensitive alternative for MIR imaging in various fields ranging from biomedical diagnostics to material inspection.