Development of the SiMPLE-PAS: A low-cost, 3-wavelength photoacoustic spectrometer for aerosol absorption

Abstract. Photoacoustic spectroscopy (PAS) has become a common method for measuring aerosol absorption, and is one of the few techniques capable of directly measuring absorption by suspended aerosol particles at ambient concentrations. When multiple wavelengths are used, PAS provides a way of measuring the absorption Ångström exponent, and, when combined with a scattering or extinction method, provides a measure of the aerosol single scattering albedo, and both AAE and SSA are important parameters in climate models. Despite this utility, few commercial PAS instruments are available and no multi-wavelength commercial instruments are currently available. Thus, most extant PAS instruments are custom-built and therefore come with considerable cost and development time and require access to machine shops capable of fabricating the needed components. The goal of this work was to provide a blueprint for a low-cost, multi-wavelength PAS for measurement of the aerosol AAE both in the laboratory and in the field. In an effort to create an instrument with a low barrier to entry, we aim to use low-cost, readily available components and open-source options wherever possible. In this manuscript, we present the SiMPLE-PAS, a single-pass, multi-wavelength, portable, and low-expense photoacoustic spectrometer that uses low-cost electronics and a 3D-printed cell to meet these design goals. The instrument has a total bill-of-materials cost on the order of $500 USD. The instrument is, to the best of our knowledge, the first 3D-printed PAS for aerosols and the lowest-cost PAS to date. The instrument performed well in laboratory validation experiments, and showed good agreement with measurements of aerosol absorption by the previously developed MultiPAS-IV instrument when co-located at the second Georgia Wildland Fire Simulation Experiment (G-WISE 2) during April 2025. The instrument shows competitive detection limits of 0.63, 1.99, and 0.55 Mm−1 for the blue, green, and red channels (10-minute, 2-σ), respectively, that will allow it to measure both ambient and laboratory-generated aerosols. The SiMPLE-PAS therefore provides a low-cost, accessible photoacoustic spectrometer that offers to lower the barrier to entry for groups wishing to measure aerosol absorption, whether in the laboratory or in the field.

Authors

Institutions

Publication Details

Published
2025-09-26
DOI
https://doi.org/10.5194/ar-2025-31
Primary Topic
Air Quality Monitoring and Forecasting
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Development of the SiMPLE-PAS: A low-cost, 3-wavelength photoacoustic spectrometer for aerosol absorption

Ashley Scott, D. Al Fischer, C. David Wise, Andrew Jordan et al.
Air Quality Monitoring and Forecasting
article

Development of the SiMPLE-PAS: A low-cost, 3-wavelength photoacoustic spectrometer for aerosol absorption

Ashley Scott, D. Al Fischer, C. David Wise, Andrew Jordan, Ryan P. Poland
article en

Abstract

Abstract. Photoacoustic spectroscopy (PAS) has become a common method for measuring aerosol absorption, and is one of the few techniques capable of directly measuring absorption by suspended aerosol particles at ambient concentrations. When multiple wavelengths are used, PAS provides a way of measuring the absorption Ångström exponent, and, when combined with a scattering or extinction method, provides a measure of the aerosol single scattering albedo, and both AAE and SSA are important parameters in climate models. Despite this utility, few commercial PAS instruments are available and no multi-wavelength commercial instruments are currently available. Thus, most extant PAS instruments are custom-built and therefore come with considerable cost and development time and require access to machine shops capable of fabricating the needed components. The goal of this work was to provide a blueprint for a low-cost, multi-wavelength PAS for measurement of the aerosol AAE both in the laboratory and in the field. In an effort to create an instrument with a low barrier to entry, we aim to use low-cost, readily available components and open-source options wherever possible. In this manuscript, we present the SiMPLE-PAS, a single-pass, multi-wavelength, portable, and low-expense photoacoustic spectrometer that uses low-cost electronics and a 3D-printed cell to meet these design goals. The instrument has a total bill-of-materials cost on the order of $500 USD. The instrument is, to the best of our knowledge, the first 3D-printed PAS for aerosols and the lowest-cost PAS to date. The instrument performed well in laboratory validation experiments, and showed good agreement with measurements of aerosol absorption by the previously developed MultiPAS-IV instrument when co-located at the second Georgia Wildland Fire Simulation Experiment (G-WISE 2) during April 2025. The instrument shows competitive detection limits of 0.63, 1.99, and 0.55 Mm−1 for the blue, green, and red channels (10-minute, 2-σ), respectively, that will allow it to measure both ambient and laboratory-generated aerosols. The SiMPLE-PAS therefore provides a low-cost, accessible photoacoustic spectrometer that offers to lower the barrier to entry for groups wishing to measure aerosol absorption, whether in the laboratory or in the field.

Western Carolina University (US), University of Georgia (US)
U.S. Forest Service
Openalex Percentile: Top 76%
Air Quality Monitoring and Forecasting
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.