The Effect of Surface Properties of Steel Sections on Bond Strength in Soil-Cement Mix

Soil strengthening with hydraulic binders has gained popularity in recent years and provides an alternative to traditional methods, both for foundation reinforcement and for retaining walls. In many cases, columns, walls, or soil-cement mix blocks require reinforcement with steel sections. Correctly assessing the load-bearing capacity of a reinforced element requires an understanding of the bonding forces between the steel and the soil-cement mix. This article presents the results of pull-out tests conducted on steel flat bars embedded in a soil-cement mix. A soil-cement mix containing sand, silt, and clay fractions was prepared. The surfaces of the flat bars were treated in three different ways, and their roughness was subsequently measured. The pull-out strength of steel flat bars embedded in a soil-cement mix with compressive strength in the range of 1–2 MPa was determined. The tests revealed a correlation between surface roughness and bond strength. The conducted tests provided the basis for developing new research directions and for formulating a new bonding model for the interaction between steel profiles and soil-cement.