BRAKE FAILURE INDICATOR CIRCUIT

Automobiles have been the primary mode of transportation for most of us and we depend on Them for our dayto-day commute.Brake failure indicator circuit is a circuit that constantly Monitor the condition of brake The sensor which is attached to the circuit of a brake failure by monitoring the brake switch and reminds you the condition of brake every time when brake is applied.This mechanism involves a Brake wire which runs from the brake lever to the Braking mechanism set-up of the vehicle.It is this wire that gets pulled when we apply brakes.To stop our vehicle Machines are widely controlled by automated control system.To meet the Need of growing population economic, effective and reliable control of machines as well as Their control system is necessary.The main objective of this project is to continuously monitor the braking system at each and every time during the operation of the vehicle.Now a days.Accidents are occurring due to lot of reasons, the one of the main reason is brake failure, it Caused to due to poor maintenance.improper use and product defect, in order to safe guard the valuable human for accident the accident monitoring of brake is very important issue in Automobile.The brake failure indicator circuit is a circuit that monitors constantly of the Condition of brakes and provides an audio-visual indication.When the brake is applied in order to slow down or to stop the vehicle the green LED blinks and the buzzer beeps for about one Second if the brake system is accurate and working properly.If brake system fails the red LED Glows and the buzzer do not beep when the brakes are applied.