Innovative Flexible Conductive Polymer Composites for Wearable Electrocardiogram Electrodes and Flexible Strain Sensors

This work reports the fabrication of innovative flexible conductive polymer composites (FCPCs), composed of poly (2,3-dihydrothieno-1,4-dioxin)-poly (styrenesulfonate) (PEDOT:PSS), polypyrrole (PPy) and copper phthalocyanine (CuPc). These FCPCs were deposited by the drop-casting technique on flexible substrates such as polyethylene terephthalate (PET), Xuan paper and ethylene–vinyl acetate (EVA) foam sheets. Wearable photoactive electrocardiogram (ECG) electrodes and flexible strain sensors were fabricated. Morphological characterization by SEM revealed a stark contrast between the smooth, continuous PEDOT:PSS films and the rough, globular PPy films. EDS confirmed the successful and homogeneous incorporation of the CuPc, evidenced by the strong spatial correlation of the nitrogen and copper signals. The highest mechanical resistance was present in the FCPCs on PET with a limit of proportionality between 4074–6240 KPa. Optical parameters were obtained by Ultraviolet–Visible Spectroscopy and their Reflectance is below 15% and could be used as photoelectrodes. Three Signal Quality Indexes (SQIs) were used to evaluate the ECG signal obtained with the electrodes. The results of all the SQIs demonstrated that the obtained signals have a comparable quality to that of a signal obtained from commercial electrodes. To evaluate the flexible strain sensors, the change in output voltage caused by mechanical deformation was measured.