Effect of Hot Water Extraction of Lignocellulosic Biomass on Fuel Pellet Properties

Pelletizing enhances competitiveness of lignocellulosic biomass (LCB) as a fuel by increasing its bulk and energy density. However, LCB pellets are prone to degradation from moisture, have high ash, and pose safety risks due to carbon monoxide (CO) emissions during storage. Hot water extraction (HWE), a mild hydrothermal treatment particularly effective for angiosperms, removes most hemicelluloses (xylans), reduces ash, and increases lignin content in remaining HWE-LCB. Based on the current understanding of CO formation, these changes suggested that HWE could reduce CO emissions. In this study, we evaluated the effects of HWE on pellets made from shrub willow, miscanthus, and wheat straw. A statistical analysis was conducted on ash, energy content, bulk density, durability, pellet length and density, moisture absorption, and CO emissions. All HWE-LCB pellets demonstrated significant increases in energy content (up to 3.54%) and reductions in moisture absorption (up to 23.84%). Although not all effects reached statistical significance, HWE generally had positive effects on ash content, bulk density, durability, and average pellet length and density. Contrary to expectations, HWE-LCB pellets emitted significantly more CO under both ambient and isothermal temperature conditions (up to 4.25 times overall increase), although still less than commercial hardwood/softwood blend pellets (<200 ppm in HWE-LCB vs. >300 ppm).